Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ASUSTOR AS68 NAS
Summary of Contents for ASUSTOR AS68 NAS
- Page 1 Network Card Installation Guide For ASUSTOR AS68 NAS Ver. 5.0.0916...
-
Page 2: Table Of Contents
1.1. Parts and Tools Needed ...................4 1.2. Removing the Cover ....................4 1.3. Installing a Network Card .....................5 1.4. Replacing the Cover ....................9 2. Appendix ......................... 10 2.1. Troubleshooting ....................10 2.2. Contact ASUSTOR Technical Support ................. 10 Page 2 of 10... -
Page 3: Installation Guide
ASUSTOR NAS Network Card Installation Guide 1. Installation Guide 1. To add a 10-Gigabit Ethernet card, install ASUSTOR NAS PCIe Mode Switcher from App Central. Select 10G NIC and press apply. Page 3 of 10... -
Page 4: Parts And Tools Needed
ASUSTOR NAS Network Card Installation Guide 3. Click OK 4. After confirmation, your NAS will shut down. After shutting down, you will now be able to install the 10-Gigabit Ethernet card after disconnecting your NAS from mains electricity. 1.1. Parts and Tools Needed Phillips head screwdriver 1.2. -
Page 5: Installing A Network Card
ASUSTOR NAS Network Card Installation Guide ⚫ Use a screwdriver to loosen the three screws found on the rear of the NAS as shown in the illustration. AS6804T AS6806T AS6808T / AS6810T ⚫ Grip the cover from both sides with two hands and then gently push it back to remove it from the chassis. - Page 6 ASUSTOR NAS Network Card Installation Guide Gently pull the M.2 card from the PCIe slot as shown below. AS6804T AS6806T AS6808T / AS6810T Undo the two screws that hold the bracket for the M.2 card in place. AS6804T AS6806T Lift the bracket out of the NAS.
- Page 7 ASUSTOR NAS Network Card Installation Guide Remove both screws in the rear of the NAS and placeholder bracket. AS6804T AS6806T AS6808T / AS6810T Unscrew and remove full-height bracket from AS-T10G2 NIC. Installation of the AS-T10G2 requires use of the included bracket designed for the Lockerstor Gen2 series of NAS devices.
- Page 8 ASUSTOR NAS Network Card Installation Guide Gently insert the network card into the PCIe slot of your NAS. AS6804T AS6806T AS6808T / AS6810T Fasten the network card to the NAS with screws. AS6804T AS6806T AS6808T / AS6810T 10. Follow these instructions in reverse order to reinstall the M.2 card.
-
Page 9: Replacing The Cover
ASUSTOR NAS Network Card Installation Guide 1.4. Replacing the Cover ⚫ Replace the cover and tighten the three screws that were removed previously. AS6804T AS6806T AS6808T / AS6810T ⚫ Reconnect all cables including the power cord and then start up the NAS. -
Page 10: Appendix
If your NAS still does not operate normally, please remove the newly installed network card, and then restart the NAS to see if it is able to operate normally. If the previous steps have not solved your problem, please contact your local dealer or ASUSTOR customer service.
Need help?
Do you have a question about the AS68 NAS and is the answer not in the manual?
Questions and answers