Table of Contents
Advertisement
Quick Links
Please read this manual carefully before using, and keep it for future reference.
User Manual
BRGC3001SS - 30 cm single burner gas stainless steel cooktop
BRGC6001SS - 60 cm 4 burner gas stainless steel cooktop
BRG7000SS - 70 cm 5 burner gas stainless steel cooktop
BRGC9001SS - 90 cm 5 burner gas stainless steel cooktop
BRGC6001BLK - 60 cm 4 burner gas glass cooktop
BRG7000BLK - 70 cm 5 burner gas glass cooktop
BRGC9001BLK - 90 cm 5 burner gas glass cooktop
BRGC-AGCP9053-D - 90 cm 5 burner gas glass cooktop
Advertisement
Table of Contents
Related Manuals for BROHN BRGC3001SS
Summary of Contents for BROHN BRGC3001SS
- Page 1 Please read this manual carefully before using, and keep it for future reference. User Manual BRGC3001SS - 30 cm single burner gas stainless steel cooktop BRGC6001SS - 60 cm 4 burner gas stainless steel cooktop BRG7000SS - 70 cm 5 burner gas stainless steel cooktop...
-
Page 2: Table Of Contents
2.4 GENERAL SAFETY ............................5 2.5 DURING USE ..............................5 2.6 CLEANING ..............................5 2.7 INSTALLATION ..............................6 3 SPECIFICATIONS ............................... 7 3.1 BRGC3001SS ..............................7 3.2 BRGC6001SS /RGC6001BLK ........................... 8 3.3 BRG7000SS/BRG7000BLK ..........................9 3.4 BRGC9001BLK..............................10 3.5 BRGC9001SS/BRGC-AGCP9053-D ......................11 3.6 ELECTRICAL DETAILS ............................. -
Page 3: Package
1.3 BEFORE USING YOUR NEW GAS HOB Read this guide, taking special note of the ‘Safety Warnings’ section. Remove any protective film that may still be on your gas hob. web:brohn.com.au... -
Page 4: Safety Warnings
Items made of aluminium, plastic or plastic film should also be kept away from the appliance as they may fuse to the surface. Repairs may only be carried out by authorised service agents and licensed professionals. web:brohn.com.au... -
Page 5: Child Safety
Great care should be taken whilst using this appliance and when following the cleaning procedure. You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance. web:brohn.com.au... -
Page 6: Installation
Manufacturer or a retailer of the appliance declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance. web:brohn.com.au... -
Page 7: Specifications
P a g e 3 SPECIFICATIONS 3.1 BRGC3001SS Product specifications: A = 1 x 14.4 MJ/h triple crown (wok) burner (NG) B = Control panel Front control operation Automatic ignition Metal pan stands Flame failure safety device on each burner. -
Page 8: Brgc6001Ss /Rgc6001Blk
B = 2 x 6.5 MJ/h semi-rapid burners (NG) C = 1 x 3.6 MJ/h auxiliary burner (NG) D = Control panel Front control operation Automatic ignition Heavy duty metal pan stands Flame failure safety device on each burner web:brohn.com.au... -
Page 9: Brg7000Ss/Brg7000Blk
B = 1 x 10.8 MJ/h rapid burner (NG) C = 2 x 6.5 MJ/h semi-rapid burners(NG) D = 1 x 3.6 MJ/h auxiliary burner(NG) E = Control panel Front control operation Automatic ignition Heavy duty metal pan stands Flame failure safety device on each burner web:brohn.com.au... -
Page 10: Brgc9001Blk
B = 1 x 10.8 MJ/h rapid burner (NG) C = 2 x 6.5 MJ/h semi-rapid burners(NG) D = 1 x 3.6 MJ/h auxiliary burner (NG) E = Control panel Front control operation Automatic ignition Heavy duty metal pan stands Flame failure safety device on each burner web:brohn.com.au... -
Page 11: Brgc9001Ss/Brgc-Agcp9053-D
B = 1 x 10.8 MJ/h rapid burner (NG) C = 2 x 6.5 MJ/h semi-rapid burners(NG) D = 1 x 3.6 MJ/h auxiliary burner(NG) E = Control panel Front control operation Automatic ignition Heavy duty metal pan stands Flame failure safety device on each burner web:brohn.com.au... -
Page 12: Electrical Details
220 - 240 Vac 50 / 60 Hz Rated Voltage: Supply Connection: 0.0008 kW Max Rated Inputs: 3 core x 0.75mm² (Type RR-F <HAR> marked) Mains Supply Lead: GAS DETAILS Connection: Rp ½ (ISO R7) Type: Natural Gas (1.0 KPa) LPG (2.75KPa) web:brohn.com.au... -
Page 13: Using The Gas Hob
All operation positions must be selected between the maximum and minimum position. Never select a knob position between the maximum and off position. The symbol on the control panel, next to the control knob will indicate which gas burner it operates. web:brohn.com.au... -
Page 14: Automatic Ignition With Flame Failure Safety Device
120 mm 200 mm Auxiliary 80 mm 160 mm The diameter of the bottom of the pan should be compatible with the burner. Use flat bottomed pans only. The burner flame must never extend beyond the diameter of the pan. web:brohn.com.au... -
Page 15: Cleaning
5.3 CLEANING THE HOB BURNERS The hob burners should be cleaned once a week or more frequently if they get soiled. IMPORTANT: Make sure that the hob surface, pan stands and hob burners have cooled before you attempt to touch them. web:brohn.com.au... -
Page 16: Maintaining The Cast Iron Pan Stands
Using a paper towel, thoroughly dry the pan stands. To maintain the appearance of the cast iron pan stands, it is recommend that you rub a small amount of olive oil into the pan stands after you have finished cleaning them. web:brohn.com.au... -
Page 17: Installation And Gas Connection
6.2 POSITIONING The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is located in. installation is according to local standards and regulations. web:brohn.com.au... -
Page 18: All Models
Apply the sealing strip (A) provided around the edge of the appliance. The protective covering must be removed from all sides. Do not leave gaps in the sealing agent or overlap it creating uneven thickness. web:brohn.com.au... -
Page 19: Important Information
Consideration must be taken if there are any other fuel burning appliances in the same room. Ensure that the room containing the hob is well ventilated. Keep natural ventilation holes or install a mechanical ventilation device such as a rangehood. web:brohn.com.au... -
Page 20: Dual Gas Regulator Valve Introduction
· Out of gas regulator valve thread must match the connecting thread with the gas. · Regulator valve installation location must be perpendicular. · After installation, open the gas source switch, and check valvebody with soap and water connections for leaks. web:brohn.com.au... -
Page 21: The Gas Kinds Of Conversion Method
After connecting to gas, check for leaks using soapy solution, never a naked flame. Gas pressure may be checked by test point located on regulator or LPG test point adaptor. Adjust regulator to the required pressure as shown on data plate, check burner ignition & and the flame is burning correctly. web:brohn.com.au... -
Page 22: Gas Safety (Installation And Use) Regulations
It is the law that all gas appliances are installed by a licensed gas fitter. It is in your interest of safety to ensure installation compliance with the law. Failure to install the hob correctly could invalidate the warranty, liability claims and lead to prosecution. web:brohn.com.au... -
Page 23: Installation Process
6.9 GAS ADJUSTMENT (CONVERSION TO LPG) All gas adjustment or conversion work must be carried out by a licensed gas fitter. IMPORTANT: Always isolate the hob from the electricity and gas supply before changing the injectors and/or adjusting the minimum flow of the burners. web:brohn.com.au... -
Page 24: Minimum Flow Adjustment For Hob Gas Taps
6.10 MINIMUM FLOW ADJUSTMENT FOR HOB GAS TAPS All work must be carried out by a licensed gas fitter. IMPORTANT: Always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. web:brohn.com.au... -
Page 25: Gas Tap Maintenance
IMPORTANT: WHEREVER THIS APPLIANCE IS INSTALLED, AT HOME, IN MARINE CRAFT OR CARAVAN, IT SHALL NOT BE USED AS A SPACE HEATER. 6.11 GAS TAP MAINTENANCE These maintenance operations MUST ONLY be carried out by a licensed gas fitter. IMPORTANT: Before carrying out any maintenance operations, disconnect web:brohn.com.au... - Page 26 P a g e | 26 the appliance from the gas and electricity supplies. web:brohn.com.au...
-
Page 27: Electrical Connection
Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. Cable type: H05 RRF 3 core x 0.75 mm³ (Type RR-F <HAR> marked). The mains supply cable and plug are supplied with this product. web:brohn.com.au... -
Page 28: Replacing The Mains Supply Cable
Ensure that the gas pipe and electrical cable are installed in such a way that they do not touch any parts of the appliance which may become hot. Gas pipe or connector hose should not be bent or blocked by other appliances. web:brohn.com.au... - Page 29 The flexible hose shall be fitted in such a way that it cannot come into contact with a moveable part of the housing unit and does not pass through space susceptible of becoming congested. Grease cranes produced at the factory to meet the requirements of all life hobs. web:brohn.com.au...
-
Page 30: Disposal
| 30 7 DISPOSAL This appliance requires special waste disposal. further information regarding the treatment, recovery and recycling of this product please contact your local council, household waste disposal service or the store of purchase. The packaging materials are recyclable. web:brohn.com.au... -
Page 31: Customer Care
INSTALLATION RECEIPT: ............... For further information on the appliance, service, spare parts or to obtain dimension and installation information, please contact our customer service or visit website. Please have above information and documents on hands before contacting customer service Email:info@brohn.com.au Web:brohn.com.au web:brohn.com.au...
Need help?
Do you have a question about the BRGC3001SS and is the answer not in the manual?
Questions and answers