Download
Share
Print this page
Intellian C200M Installation & Operation User Manual
  1. Manuals
  2. Brands
  3. Intellian Manuals
  4. Touch terminals
  5. C200M
  6. Installation & operation user manual
Intellian C200M Installation & Operation User Manual

Intellian C200M Installation & Operation User Manual

Intellian certus terminal
Hide thumbs

Advertisement

Quick Links

Download this manual
C200M
Intellian Certus Terminal
Installation & Operation User Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the C200M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Intellian C200M

Summary of Contents for Intellian C200M

  • Page 1 C200M Intellian Certus Terminal Installation & Operation User Guide...
  • Page 2 Information in this document is subject to change without notice. Every effort has been made to ensure that the information in this manual is accurate. Intellian is not responsible for printing or clerical errors.

  • Page 3: Table Of Contents

    5.2 ADU Mounting Hole Pattern 5.3 Mast Designing (Installation Example) 5.4 Mounting Antenna 5.4.1 Mounting Antenna using C200M Outer Common Holes (with M6 Bolts) 5.4.2 Mounting Antennas using Holes matching Iridium Pilot (with M10 Bolts) 5.4.3 Mounting Antenna on Pole (Optional) 5.5 Vent Hole...
  • Page 4 C200M - Marine Satellite Communication System 6.6 BDU Cable Connection 6.6.1 BDU Back Panel View 6.6.2 BDU Connector Pinout Guide 6.6.3 Connecting DC Power to BDU 6.6.4 Connecting BDU to ADU (Antenna) 6.6.5 Connecting BDU to Devices using LAN Port (RJ45) 6.6.6 Connecting BDU to Device using WAN Port...
  • Page 5 Table of Contents 8.7.7 Terminal info 8.7.8 External GPIO 8.7.9 SDF 8.8 Setup 8.8.1 Network 8.8.2 Wi-Fi 8.8.3 Firewall 8.8.4 Phone/PABX 8.8.5 Data 8.8.6 Data Limit 8.8.7 SDF 8.8.8 External GPIO 8.8.9 Location Service 8.9 Tools 8.9.1 Software Upgrade 8.9.2 Backup & Restore 8.9.3 Reset 8.9.4 Logs 8.9.5 Diagnostic...
  • Page 6 Figure 9: Antenna Dimensions Figure 10: ADU Mounting Hole Pattern Figure 11: Recommended Mast Design using C200M Outer Common Holes (with M6 Bolts) Figure 12: Recommended Mast Design using Holes matching Iridium Pilot (with M10 Bolts) Figure 13: Mounting Antenna using C200M Outer Common Holes (with M6 Bolts)
  • Page 7 Table of Contents Figure 38: BDU to Device Cable Connection using WAN Port Figure 39: BDU to POTS Phone (RJ14) Cable Connection Figure 40: Using Cable Splitter with POTS Phones (RJ14) Figure 41: BDU to External Devices Connection Figure 42: Wi-Fi Antenna to BDU Connection Figure 43: Grounding Stud Connection Chapter 7.

  • Page 8: Chapter 1. Precautions

    C200M - Marine Satellite Communication System Chapter 1. Precautions 1.1 Warnings, Cautions, and Notes WARNING, CAUTION, and NOTE statements are used throughout this manual to emphasize important and critical information. You must read these statements to help ensure safety and to prevent product damage.
  • Page 9 Precautions * DO NOT SHIP VIA RAIL: Ensure not to ship any system via rail. * Shock Hazard: To minimize shock hazard and to protect against lightning, you must connect the equipment chassis and cabinet to an electrical ground. Make sure the system is correctly grounded and power is off when installing, configuring, and connecting components.

  • Page 10: Chapter 2. Certifications

    (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Changes or modifications made to this equipment not expressly approved by Intellian Technologies, Inc. may void the FCC authorization to operate this equipment.

  • Page 11: Chapter 3. Introduction

    Ethernet over Coax technology (MoCA) allows for both power and digital data signals to be transferred between the ADU and BDU through a single coaxial cable. The TNC connectors used on the C200M match common industry practice for this size of terminal, supporting re-use of an existing good condition cable if desired.

  • Page 12: Iridium Satellite Network

    C200M - Marine Satellite Communication System 3.3 Iridium Satellite Network The Iridium satellite network is comprised of 66 low-earth orbiting (LEO), cross-linked satellites, providing voice and data coverage over Earth’s entire surface. At only 476 mile (780 km) from the earth, the proximity of Iridium’s LEO network means pole-to-pole coverage, a shorter transmission path, stronger signals, lower latency, and shorter registration time than with GEO satellites.

  • Page 13: Chapter 4. Planning Installation

    Planning Installation Chapter 4. Planning Installation The antenna installation requires precaution and safety measures. Failure to follow the correct installation process may lead to injury of the installer and/or cause damage to the system. To maximize the performance of the system, a thorough review of this installation guide is strongly recommended. In addition, you should execute the installation process as it is noted in this manual.

  • Page 14: Rf Hazard Precautions

    C200M - Marine Satellite Communication System 4.1.2 RF Hazard Precautions The antenna is designed to be used with radiation transmitting equipment manufactured by others. Exposure to RF radiation, including exposure associated with improper use of the transmitting equipment, may be hazardous to people who work close to the Above Deck Unit. Ensure the safety of personnel who work with in the system.

  • Page 15: System Package

    Intellian’s web-based software. The BDU contains user interfaces and controls all communication between the ADU and the local communication devices such as phones, and computers, etc.

  • Page 16: Packing List

    19-inch Rack Mount Kit (Optional) The 19-inch Rack Mount Kit can be purchased separately. When this kit is supplied, it is packaged in the BDU Package. Intellian recommends using a 19" rack shelf (not supplied) to support the BDU in the rack. Item...
  • Page 17 Planning Installation Antenna Pole Mount Kit (Optional) The Antenna Pole Mount Kit can be purchased separately. When this kit is supplied, it is provided in a separate box. Item Q'ty Size Description Pole Bracket Pole Tube Hex Bolt M6 x 20L Hex Bolt M6 x 25 L Only for FB250/FleetOne use...

  • Page 18: System Cables

    4.3.1 Antenna RF Cable (Connecting ADU - BDU) Intellian provides the Antenna RF Cable (LMR200, 25 m) for connecting ADU and BDU. Due to the signal losses across the length of the RF coax on L-Band, it must only use the RF cables using the 50 Ω coaxial cable types for standard system installation.

  • Page 19: Unpacking System Package

    Planning Installation 4.4 Unpacking System Package Follow the steps for easy and safe unpacking. The system package consists of two sub-packages that an ADU Package and a BDU Package. Unit: mm (inches) BDU Package ADU Package Sub-package Figure 6: Unpacking System Package (with ADU & BDU 1.

  • Page 20: Figure 8: Unpacking Adu Package

    C200M - Marine Satellite Communication System 2. Take out the ADU package including an Antenna Mounting Template, an ADU Bolt Kit, an Antenna RF Cable, and an ADU Unit. Antenna Mounting Template ADU Bolt Kit Antenna RF Cable ADU Unit...

  • Page 21: Chapter 5. Installing Adu

    Unit: mm (inches) Unit: mm (inches) Ø240 (Ø9.5) RF Port Vent Plug 4-M6 Tap, 4-M10 Tap, B.C.D Ø175.4 mm (6.9”) B.C.D Ø150 mm (5.9”) C200M Outer Common Holes matching Iridium Holes (with M6 Bolts) Pilot (with M10 Bolts) Figure 9: Antenna Dimensions...

  • Page 22: Adu Mounting Hole Pattern

    Select one of the two mounting types to secure the antenna to the desired mounting surface. • C200M Outer Common Holes: Mount the antenna using ‘C200M Outer Common Holes’ (with M6 Bolts). Intellian offers the Antenna Pole Mount Kit (separate purchase) that uses C200M Outer Common Holes (with M6 Bolts) to mount the antenna on a pole.

  • Page 23: Mast Designing (Installation Example)

    The installation mast must be robust enough to prevent flection, vibration, and sway when an external force is exerted on the mast with antenna and radome attached. Intellian strongly recommends installing the antenna less than 1200mm (47") above the deck. The flange thickness must be at least 8 mm. Refer to the following mast drawing for more details.

  • Page 24: Figure 12: Recommended Mast Design Using Holes Matching Iridium Pilot (With M10 Bolts)

    C200M - Marine Satellite Communication System Option 2. Recommended Mast Design using Holes matching Iridium Pilot (with M10 Bolts) (Unit: mm (inch)) Figure 12: Recommended Mast Design using Holes matching Iridium Pilot (with M10 Bolts)

  • Page 25: Mounting Antenna

    M10 Spring Washer M10 x 20L Hex. Bolt Figure 13: Mounting Antenna using C200M Outer Common Holes (with M6 Bolts) 5.4.2 Mounting Antennas using Holes matching Iridium Pilot (with M10 Bolts) First, remove the protective covers on the Outer Holes. Check the position of the antenna’s RF port...

  • Page 26: Mounting Antenna On Pole (Optional)

    5.4.3 Mounting Antenna on Pole (Optional) Intellian offers the Antenna Pole Mount Kit (separate purchase) to mount the antenna on the pole. The kit is designed to work on the 40A pole. The kit has mounting holes that match the inner hole with M6 bolts on the bottom of the antenna.

  • Page 27: Vent Hole

    Installing ADU 3. Place the antenna on the pole-mounted bracket then tighten them using bolts. Before assembling bolts, apply Loctite #263 to the bolt’s threads to ensure the bolts are fastened firmly. x Four Times M6 Flat Washer M6 Spring Washer Use a torque wrench.

  • Page 28: Connecting Antenna Rf Cable

    C200M - Marine Satellite Communication System 5.6 Connecting Antenna RF Cable The cable must be routed from the antenna and through various areas of the ship to end up at the Below Deck Unit. When pulling the cables in place, avoid sharp bends, kinking, and excessive force. After placement, seal the deck penetration gland and tie the cable securely in place.

  • Page 29: Figure 20: Routing Rf Cable

    Cable Brackets Gooseneck on Deck Gooseneck on Deck To Below Decks To Below Decks Connecting Antenna RF Cable using Connecting Antenna using Holes C200M Outer Common Holes (with M6 Bolts) matching Iridium Pilot Holes(with M10 Bolts) Figure 20: Routing RF Cable...

  • Page 30: Chapter 6. Installing Bdu

    Chapter 6. Installing BDU The Intellian offers two versions of BDU installation, one can be installed to the surface of the wall or desktop, and one can be installed to the 19-inch rack frame using the BDU Rack Mount Kit (separate purchase).

  • Page 31: Figure 22: Bdu Dimensions (Installed Using 19-Inch Bdu Rack Mount Kit)

    Installing BDU Unit: mm (inches) 280 (11.02) 315 (12.40) 42 (1.65) 485.7 (19.12) Figure 22: BDU dimensions (installed using 19-inch BDU Rack Mount Kit)

  • Page 32: Bdu Mounting Template

    C200M - Marine Satellite Communication System 6.3 BDU Mounting Template The BDU mounting holes must be in the exact same place as shown in the provided mounting template below. 300 mm (11.81") Drill Hole Ф 3.8 mm (0.14") diameter in...

  • Page 33: Mounting Bdu

    Intellian offers the BDU Rack Mount Kit (separate purchase) including the rackmount plate and cable tray to mount the BDU in a 19" rack. Intellian recommends using a 19-inch rack shelf (not supplied) to support the BDU in the rack.

  • Page 34: Figure 26: Attach Rackmount Plate To Bdu

    C200M - Marine Satellite Communication System 2. Using the Screws supplied, attach the rackmount plate to the BDU. Rackmount Plate Pan Head Screw (with Spring & Flat Washer), M4 x 16 L (4 ea) Figure 26: Attach Rackmount Plate to BDU 3.

  • Page 35: Antenna System Configuration

    POTS Phone Phone Figure 28: C200M System with Connected Devices 6.5.1 Data Sessions and Voice Calls The System provides up to 3 high-quality voice calls, multiple data sessions, Wi-Fi, and supports up to 18 extensions (including 2 analog phones and 16 sip phones).

  • Page 36: Bdu Cable Connection

    C200M - Marine Satellite Communication System 6.6 BDU Cable Connection 6.6.1 BDU Back Panel View The following figure shows the BDU back panel connectors. WAN (Wide Area Grounding Power Antenna (TNC) Network) Wi-Fi GPIO SIM Card **PoE (Power over *LAN (Local Area...

  • Page 37: Figure 31: Antenna Connector (Tnc) Pinout

    Installing BDU Antenna Connector (TNC) RF TNC Female Conductor Function Inner Data, 48 V DC Power Outer Ground Figure 31: Antenna Connector (TNC) Pinout LAN Connectors (1~4) (RJ45) 1 2 3 4 5 6 7 8 RJ-45 Female Signal Figure 32: LAN Connector (RJ45) Pinout POTS Phone Connector (RJ14) 1 2 3 4 5 6 RJ14 &...

  • Page 38: Figure 34: Gpio Connector Pinout

    C200M - Marine Satellite Communication System General Purpose Inputs/Outputs (GPIO) Connector The BDU has a dedicated 16-pin connector to provide a GPIO (General Purpose Input/Output) interface to the external devices. All wires for the GPIO connector must use AWG 24 unscreened wire type.
  • Page 39 Installing BDU To use External GPIO, connect the external power (DC 12V ~ 24V). Refer to the External GPIO Block Diagram below. External GPIO Block Diagram INPUT 1 INPUT 2 Programable Digital Input 12V, 24V External Power Input External power input (DC12V ~ 24V) External Power ground OUTPUT 1 OUT_GND...

  • Page 40: Connecting Dc Power To Bdu

    6.6.3 Connecting DC Power to BDU You can supply DC power to the BDU in the following methods depending on the power supply available in the vessel. Intellian provides a DC Power Cable, an AC-DC Adapter* (optional), and a Terminal Block for the power connections.
  • Page 41 How to Use Terminal Block WARNING Turn off the power before installing the wire nut connector. WARNING Intellian provides a 3-position double-row barrier terminal block as below. Terminal Block: KH-6060-3P Position 1 Position 2 Position 3 Barrier type terminal strip:...
  • Page 42 C200M - Marine Satellite Communication System Black (negative) For the DC power wires, Red (positive) and Black (negative), you can connect each wire with other wires using the terminal block. Red (positive) 1. Open the top cover of the terminal block.

  • Page 43: Connecting Bdu To Adu (Antenna)

    6.6.5 Connecting BDU to Devices using LAN Port (RJ45) Intellian provides the Ethernet Cable. Connect the Ethernet Cable from the Port 1, Port 2, Port 3, or Port 4 on the back of the BDU to the LAN port on the devices such as SIP Phone or Computer. Only the Port 1 and Port 2 are LAN port includes Power over Ethernet (PoE).

  • Page 44: Connecting Bdu To Device Using Wan Port

    C200M - Marine Satellite Communication System 6.6.6 Connecting BDU to Device using WAN Port Intellian provides the Ethernet Cable. Connect the Ethernet Cable from the WAN port on the back of the BDU to the RJ-45 port on the devices such as LTE modem.

  • Page 45: Connecting Bdu To External Devices

    External Devices Figure 41: BDU to External Devices Connection 6.6.9 Connecting Wi-Fi Antenna to BDU Intellian provides the Wi-Fi Antenna for Wi-Fi connection. Plug the Wi-Fi Antenna into the Wi-Fi port on the back of the BDU. Wi-Fi Antenna Wireless...

  • Page 46: Inserting Sim Card

    C200M - Marine Satellite Communication System 6.6.11 Inserting SIM Card The system requires a SIM card from the service provider to use the terminal and configure the settings of the BDU. 1. Find the SIM card slot on the BDU and open the cover.

  • Page 47: Chapter 7. Operating Bdu

    Operating BDU Chapter 7. Operating BDU The BDU and ADU are connected by a single coaxial cable through which power and Ethernet data are delivered between the BDU and ADU. The BDU is responsible for all the terminal management, system monitoring, control, error detection, and maintenance operations.

  • Page 48: Powering On System

    5. Toggle PoE button to the ON position on the port 1 or port 2. If you don’t want to use PoE connection, choose the OFF position. NOTE: The LAN port 3 and LAN port 4 are not available for C200M model. 6. Select the LAN from the Port Type drop-down list.

  • Page 49: Registering Phones To Make / Receive Calls

    Operating BDU 7.4 Registering Phones to Make / Receive Calls When both Power and Satellite LED indicators of the terminal turn steady Green, you are ready to make or receive the first call. 7.4.1 Checking Active Voice Lines Before registering phones, go to STATUS Voice and check the activation status of voice lines and their MSISND numbers on the SIM configuration page.

  • Page 50: Making Local Phone Call

    C200M - Marine Satellite Communication System 7.4.3 Making Local Phone Call To make a local call between phones connected to the terminal, dial a registered extension number (201 ~ 216) of each phone. NOTE: For POTS phone, extension 101 and 102 are already assigned.

  • Page 51: Using Grandstream Voip Phone Call

    Operating BDU 7.5 Using Grandstream VoIP Phone Call Use the Grandstream VoIP phone to make VoIP phone calls. Recommended VoIP Phones • Grandstream GXP16 Series: 1610, 1615, 1620, 1625, 1628, 1630 • Grandstream GXP17 Series: 1760, 1780 • Grandstream GXP21 Series: 2120, 2130, 2135, 2140, 2160, 2170 •...
  • Page 52 C200M - Marine Satellite Communication System 4. Go to Account > Account 1 > General Settings. 5. According to the AptusLX setting, enter the values for General Settings. 192.168.0.1 Location Service AptusLX VoIP Phone Enter the values according to the AptusLX setting The engineer needs to remember the default IP for (SETUP >...
  • Page 53 Operating BDU AptusLX VoIP Phone Extension 10X (ex.101,102) is used for analog Input values for Account name / SIP User ID / phones. For VoIP phones, used Extension 20X to Authenticate ID / Name / Voice Mail Access assign desired number. To create new extension Number according to the AptusLX setting.

  • Page 54: Using Wireless Devices Through Wi-Fi

    2. Connect an Ethernet cable from any LAN ports (Port 1~ Port 4) on the back of the BDU to the LAN port of PC. The network connection is established automatically. 3. Use the following IP address to access the Intellian AptusLX Web page. • IP Address: 192.168.200.1 (Default) 4.

  • Page 55: Using Mobile Phone Call

    Operating BDU 7.7 Using Mobile Phone Call 7.7.1 Installing Mobile Application To be able to use a mobile phone call you must install a compatible mobile application. Intellian recommends using the following mobile application: Grandstream Wave App • App Store: https://apps.apple.com/us/app/grandstream-wave/id1029274043?ls=1 •...

  • Page 56: Setting Mobile Phone

    C200M - Marine Satellite Communication System 7.7.3 Setting Mobile Phone Using Grandstream Wave App (Recommended) through Mobile Phone To make a call on your mobile phone, Intellian recommends using the Grandstream Wave app. Follow the steps below to set up your mobile phone. AptusLX201 AptusLX201 192.168.200.1:5060...

  • Page 57: How To Access Terminal Remotely

    1. Connect an Ethernet cable from a LAN port (Port 1~ Port 3) on the back of the BDU to a LAN port of PC. The network connection is established automatically. 2. Use the following IP address to access the Intellian AptusLX Web page. • IP Address: 192.168.200.1 (Default) 3.
  • Page 58 C200M - Marine Satellite Communication System 7. Enter the following IP address for remote access. • For the Satellite Connection, contact Iridium for the accessible IP information. • For the WAN Connection, go to STATUS Network WAN Status and find IP address assigned to...

  • Page 59: Chapter 8. Using Aptuslx

    Using AptusLX Chapter 8. Using AptusLX 8.1 Introduction With the embedded AptusLX software, the antenna can be monitored, controlled, and diagnosed remotely, anytime through the TCP/IP protocol. This saves you the time and cost generated by various maintenance activities, such as upgrading firmware, tracking parameter resets, and diagnosing system issues. 8.2 Accessing Internal Webpage of BDU The network is automatically configured by DHCP with no additional PC IP configuration.

  • Page 60: Login

    C200M - Marine Satellite Communication System 8.3 Login The Intellian software Aptus provides different user access levels to protect the system for safe operation. Depending on the user level, the accessible functions in the software may be limited (see the table below).

  • Page 61: Top Menus

    View Manual Select the View Manual button to open the user guide pop-up window. Button ⑨ Select the Intellian button to manage your account details and select the Account Button Logout menu to log out of the AptusLX web page.

  • Page 62: Account Menu

    C200M - Marine Satellite Communication System 8.5 Account Menu Click the Intellian button to manage the user account. The User menus are for user management. Click the Logout button to log- out of the AptusLX web page. 8.5.1 User Item Description ①...

  • Page 63: Logout

    Using AptusLX Item Description If you have forgotten your ID and/or password, you can reset depending on your account level. The intellian account allows you to reset the guest account. ④ Reset ID/ Password Click the account button to reset to the default id and password. For the next login, the default id and password are required.

  • Page 64: Dashboard

    C200M - Marine Satellite Communication System 8.6 Dashboard The Dashboard menu item provides access to quick monitoring of the antenna status. Once displayed, the Dashboard helps you arrange panels on a single screen, while providing you with a broad view of a variety of information at once.

  • Page 65: How To Add & Remove Panels (Dashboard Setting)

    Using AptusLX 8.6.1 How to Add & Remove Panels (Dashboard Setting) Adding Panels 1. Click the gear icon on the right side of the page (see figure below). The Dashboard Setting window displays. 2. Check the box of the panel that you wish to add to the dashboard. 3.

  • Page 66: Status

    C200M - Marine Satellite Communication System 8.7 Status This menu displays the Network, Wi-Fi, Phone/PBX, Data, Certus, SIM, Terminal Info, External GPIO, and SDF function. 8.7.1 Network Item Description ① Network Displays the information about a network and ports. Displays the network information in use.

  • Page 67: Wi-Fi

    Using AptusLX 8.7.2 Wi-Fi Item Description ① Wi-Fi Displays Wi-Fi access information. Displays the Wi-Fi access point configuration. • Status: Displays the Wi-Fi status (Active/Inactive). • SSID: Displays the SSID network name. • MAC Filler: Displays the MAC address filtering status (Enabled/Disable). ②...

  • Page 68: Phone/Pabx

    C200M - Marine Satellite Communication System 8.7.3 Phone/PABX Item Description ① Phone/PABX Displays the phone and Private Automatic Branch Exchange (PABX) status. Displays the extension number and details. • Extension: Displays the registered extension. ② Extension • Inbound Line: Displays the inbound line in use through the blue indicator.

  • Page 69: Data

    Using AptusLX 8.7.4 Data Item Description ① Data Displays the data setting status. ② Displays the data route (None, Satellite Only, WAN Only, Satellite Preferred, Routing WAN Preferred) in use. ③ Miscellaneous Displays the Miscellaneous status (Remote HTTP/ SNAT (Source Network Status Address Translation).

  • Page 70: Certus

    C200M - Marine Satellite Communication System 8.7.5 Certus Item Description ① Certus Displays the modem state and the satellite information. Displays the modem status. • Network Detected: Displays the network connection status (Yes/No). • Network Type: Displays the network type in use.

  • Page 71: Sim

    Using AptusLX 8.7.6 SIM Item Description ① Displays information about the SIM card, and the voice and data status. Displays the SIM card information in use. • Connected: Displays the connection status of the SIM card. The SIM must be ②...

  • Page 72: Terminal Info

    C200M - Marine Satellite Communication System 8.7.7 Terminal info Item Description ① Terminal info Displays the system terminal information. ② Displays BDU information in use. ③ Displays ADU information in use. ④ Modem Displays the core module information in use.

  • Page 73: External Gpio

    Using AptusLX 8.7.8 External GPIO Item Description ① External GPIO Displays external GPIO status. ② Inputs Displays input information in use. ③ Outputs Displays output information in use.

  • Page 74: Sdf

    C200M - Marine Satellite Communication System 8.7.9 SDF Item Description ① This menu is for service providers. Displays Secondary Data Flow (SDF) information. ② SDF Config Displays the IP address assigned to the SDF.

  • Page 75: Setup

    Using AptusLX 8.8 Setup This menu sets and displays the Network, Wi-Fi, Firewall, Phone/PBX, Data, SDF, and External GPIO function. 8.8.1 Network Item Description ① Network Sets the information about a network and ports. Sets the network configuration. • DHCP: Sets the DHCP function by toggling the activation button (Activated/ Deactivated).

  • Page 76: Wi-Fi

    C200M - Marine Satellite Communication System 8.8.2 Wi-Fi Location Service Item Description ① Wi-Fi Sets the Wi-Fi access information. Sets the Wi-Fi access point configuration. • Activate: Sets the Wi-Fi function by toggling the activation button (Enabled/ Disabled). • SSID: The SSID is the name that allows devices to identify and connect to the wireless network.
  • Page 77 Using AptusLX Item Description Displays the MAC address. To create new MAC addresses, click the plus icon. ④ MAC Filter List Then the pop-up window is opened. You can assign the new MAC address. Click the Create button. The created MAC addresses display on the list.

  • Page 78: Firewall

    C200M - Marine Satellite Communication System 8.8.3 Firewall Location Service 1/40 Item Description ① Sets the firewall, network security system, which monitors and controls Firewall incoming and outgoing network traffic based on predetermined security rules. Sets the firewall configuration. • Activate: Sets the firewall function by toggling the activation button (Enabled/ Disabled).
  • Page 79 Using AptusLX Creating Firewall Rules (Example): To block www.youtube.com, 1. Click the Add button (plus symbol). On the pop-up window, enter the settings. Click the Update button to save. Enter each value accurately as the following. • Source: IP address or 0.0.0.0 (0.0.0.0 means all the IP addresses) •...
  • Page 80 C200M - Marine Satellite Communication System 3. Try to open www.youtube.com on your web browser. Once applied, the user will not be able to access the website. 4. Make sure you can open websites other than www.youtube.com.

  • Page 81: Phone/Pabx

    Using AptusLX 8.8.4 Phone/PABX Location Service Item Description ① Phone/PABX Sets the phone and Private Automatic Branch Exchange (PABX). Sets the extension number and details. • Edit( ) button: To edit the registered extension, click the edit button. Then the pop-up window is opened. You can edit details. •...

  • Page 82: Data

    C200M - Marine Satellite Communication System 8.8.5 Data Location Service Item Description ① Data Sets the data settings. Selects the data route type (None, Satellite Only, WAN Only, Satellite Preferred, ② WAN Preferred). Routing Config Click the Apply button to apply the settings to the system.
  • Page 83 Click the Apply button to apply the settings to the system. Translates the source address in packet that enter external and leave out through C200M terminal LAN interface to the terminal ip address. Set the SNAT(Source Network Address Translation) by toggling the Active button (Enabled/Disabled).

  • Page 84: Data Limit

    The data limit is set for user information only. The actual data usage is not limited exactly in the unit of the data limit settings. Note that there can be differences between the actual data usage and the data limit. Intellian is not responsible for any data access fees and charges from your service provider. CAUTION...

  • Page 85: Sdf

    Using AptusLX 8.8.7 SDF Item Description ① Sets each SDF settings. Enter each SDF IP and subnet address. ② SDF Config Click the each Apply button to apply the settings to the system.

  • Page 86: External Gpio

    C200M - Marine Satellite Communication System 8.8.8 External GPIO Location Service Item Description GPIO stands for General Purpose Input/Output. It’s a standard interface used to connect microcontrollers to other electronic devices. It allows for providing ① External GPIO remote control of connected devices.

  • Page 87: Location Service

    Using AptusLX 8.8.9 Location Service Item Description ① Aptus LX sends GNSS data according to the user setting. Enabling this function Location Service sends the GNSS data to a specified server at a specified periodicity. Sets the location service. • Active: Sets the Location Service function by toggling the activation button (Activated/ Deactivated).

  • Page 88: Tools

    C200M - Marine Satellite Communication System 8.9 Tools This menu sets and displays the Software Upgrade, Backup & Restore, Reset, Logs, and Diagnostic function. 8.9.1 Software Upgrade Item Description ① Software Upgrades antenna software firmware. Upgrade Browse and select the package firmware file to upload, and then click the Upload button.
  • Page 89 Using AptusLX Package Update Procedure 1. Browse and select the upgrade package file to upload. 2. Click the Upload button to transfer the Firmware package file (*.bin) to the BDU module. The antenna firmware state will appear in the pop-up window. 3.

  • Page 90: Backup & Restore

    C200M - Marine Satellite Communication System 8.9.2 Backup & Restore Item Description ① Backup and Backs up user configuration files to PC and Restores the antenna settings. Restore ② Saves user configuration files to PC. Click the Backup button to apply the Backup settings to the system.

  • Page 91: Reset

    Using AptusLX 8.9.3 Reset Item Description ① Reset Resets the antenna system and factory reset. ② Click the Reboot button to reset the antenna system. The user configuration is Reboot not reinitialized. ③ Click the Factory Reset button to initialize the antenna system. The user Factory Reset configuration is initialized.

  • Page 92: Logs

    C200M - Marine Satellite Communication System 8.9.4 Logs Item Description ① Logs Downloads the antenna log data. Displays the antenna log list. ② • Download Log File: Any log data (.gz) within a month can be downloaded. Log Download Click the Download Log File button.

  • Page 93: Diagnostic

    Using AptusLX 8.9.5 Diagnostic Item Description ① Diagnostic Executes antenna diagnosis test to check the antenna status. ② Hardware Test Sets the hardware test function by toggling the activation button (Active/ Mode Status Inactive). The activation button must be selected to the "Active" in the previous step. ③...

  • Page 94: Support

    C200M - Marine Satellite Communication System 8.9.6 Support Item Description ① Support Downloads the User Guide. ② Manual The user guide file (.pdf) can be downloaded. Click the Download button.

  • Page 95: Chapter 9. Specification

    Specification Chapter 9. Specification 9.1 Antenna Specification Item Specification Roll ±20° at 0.4 Hz and ±15° at 0.33 Hz Pitch ±20° at 0.45 Hz and ±30° at 0.25 Hz Ship’s Motion ±20° at 0.45 Hz and ±10° at 0.2 Hz Turning rate 12°/sec Headway...

  • Page 96: Below Decks Unit Specification

    C200M - Marine Satellite Communication System 9.3 Below Decks Unit Specification Item Specification Size (W x D x H) 315 x 190 x 42 mm (12.4" x 7.5" x 1.7") Weight 1.5 kg (3.3 lbs) (Stand-alone Type) LED Indicator 3 LEDs for Power, Tracking, Event...

  • Page 97: Environmental Specification

    Specification 9.5 Environmental Specification Test Intellian Standard Operational IEC-60945 (-25 °C to + 55 °C / Power On) IEC-60945 (-40 °C to + 80 °C / Powered On and Temperature (ADU) Survival a non-functional state) Storage IEC-60945 (-40 °C to + 85 °C / Power off) Operational IEC-60945 (-25 °C to + 55 °C)

  • Page 98: Chapter 10. Warranty Policy

    Intellian Technologies, will (at its sole discretion) repair or replace during the warranty period any product which is proven to be defective in materials or workmanship, in accordance with the relevant product warranty policy.

  • Page 99: Chapter 11. Appendix

    Appendix Chapter 11. Appendix 11.1 Tightening Torque Specification This table shows the recommended values of tightening torques. Bolt Size Tightening Torque (N-m) M2.5...

  • Page 100: Pole Mount Kit

    C200M - Marine Satellite Communication System 11.2 Pole Mount Kit Refer to the following Pole mount kit drawing for more details. 4 - Ø 7 Hole, Thru Unit: mm 4 - Ø 6.5 Hole, Thru 175.4 229.4 83.3 Figure 45: Mounting Bracket Unit: mm Ø...
  • Page 101 Appendix Unit: mm 4 - M6 Tap, DP 15 Ø 89 3 - M12 Tap, Thru E.S 60° Ø 76 Figure 47: Mounting Hub...