Table of Contents Products Covered By This Installation Guide ChargePort Pro Part Numbers Specifications Important Safety Instructions Approval Information What Is Included In The Box Dimensions Installation Mains Safety Cutout Qi Foreign Object Detection USB Charging Protection High Ambient Temperatures...
Products Covered By This Installation Guide ChargePort Pro is sleek and stylish to blend easily with your décor choices and is available in either black or grey. Dual Mains Outlets and Qi ChargePort Pro features dual tamper resistant US 120V NEMA-5 mains outlets which are rotated to maximise flexibility and can supply a total of up to 10A.
Important Safety Instructions • Read these instructions carefully before attempting any installation. Follow all instructions and heed all warnings. These instructions should be kept for future reference. • This equipment is designed for indoor use only. • The mains plug used to disconnect this equipment from its power source must be readily accessible at all times.
Approval Information Conforms to UL Std. 62368-1/498. Certified to CSA Std. CSA22.2#62368-1 C22.2#42. What Is Included In The Box 1 x ChargePort Pro with integrated cabling. 1 x cable clamp. 1 x adhesive pad. 1 x security lanyard. 1 x Installation Guide Fixing screws.
Make sure the area you are sticking it to is clean and free from grease. Remove the protective covering from the side of the pad that attaches to the base of the ChargePort Pro and stick it to the base. Remove the other protective covering and place on the surface as required. Apply gentle downward pressure to ensure good adhesion.
Mains Safety Cutout ChargePort Pro is equipped with a 10A safety cutout. In the event the cutout is tripped then unplug any attached devices, wait at 5 minutes and reset the cutout button on the rear. If the cutout continues to trip then unplug ChargePort Pro and arrange for it to be serviced by an authorized agent.
Regulatory Information ISED Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
20 cm between the radiator and your body. Contact Details Americas TeleAdapt Inc 1315 Greg Street Suite 110 Sparks NV 89431 Tel: +1 775 355 8585 Asia TeleAdapt (Hong Kong) Limited Hong Kong Kowloon Tel: +852 2155 1383 Email: hk@teleadapt.com...
Page 13
Table des matières Produits couverts par ce guide d'installation Numéros de pièces ChargePort Pro Caractéristiques Consignes de sécurité importantes Informations d'approbation Ce qui est inclus dans la boîte Dimensions Installation Coupe-circuit de sécurité secteur Détection d'objets étrangers Qi Protection de chargement USB Températures ambiantes élevées...
Ceci est disponible en noir ou gris. Double prise secteur et Qi ChargePort Pro est doté de deux prises de courant US 120 V NEMA-5 inviolables qui sont pivotées pour maximiser la flexibilité et peuvent fournir un total jusqu'à 10 A. La surface supérieure dispose d’un chargeur sans fil Qi 10 W intégré.
Caractéristiques • Construction durable conçue pour un usage quotidien. • 2 prises US, inviolables, NEMA-5, 120 V, 10 A max. partagées. • Disposition des prises de courant pivotée pour une flexibilité maximale. • Disjoncteur intégré de 10 A. • Tapis de chargement sans fil certifié Qi 10 W avec détection d'objets étrangers.
Consignes de sécurité importantes • Lisez attentivement ces instructions avant de tenter toute installation. Suivez toutes les instructions et tenez compte de tous les avertissements. Ces instructions doivent être conservées pour référence future. • Cet équipement est conçu pour une utilisation à l'intérieur uniquement.
Informations d'approbation Conforme à la norme UL Std. 62368-1/498. Certifié selon la norme CSA Std. CSA22.2#62368-1 C22.2#42. Ce qui est inclus dans la boîte 1 x ChargePort Pro avec câblage intégré. 1 serre-câble. 1 tampon adhésif. 1 cordon de sécurité.
Assurez-vous que la zone sur laquelle vous le collez est propre et exempte de graisse. Retirez le revêtement de protection du côté du coussinet qui se fixe à la base du ChargePort Pro et collez-le à la base. Retirez l'autre revêtement protecteur et placez-le sur la surface selon les besoins.
également nuire aux performances de chargement sans fil. Si cela se produit, il peut être nécessaire de retirer le téléphone de l'étui avant de reprendre le chargement sans fil. Garantie Veuillez consulter les « Conditions générales de vente » de TeleAdapt disponibles sur http://www.teleadapt.com/teleadapt/sales-terms- conditions.html.
Informations réglementaires Déclaration d'ISDE Cet appareil contient des émetteurs/récepteurs sans licence qui sont conformes aux RSS sans licence d'Innovation, Sciences et Développement économique Canada. L’exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer des fonctionnement de l'appareil.
20 cm entre le radiateur et votre corps. Coordonnées Amériques TeleAdapt Inc 1315 Greg Street Suite 110 Sparks NV 89431 Tel: +1 775 355 8585 Asie TeleAdapt (Hong Kong) Limited Hong Kong Kowloon Tel: +852 2155 1383 Email: hk@teleadapt.com...
Page 22
Visit our website at: www.teleadapt.com TA-7820-xxxx, ChargePort Pro Installation Guide. Revision 1.2, 2024‑10‑03. All rights reserved. All copyrights and trademarks acknowledged. Specifications subject to change without notice.
Need help?
Do you have a question about the ChargePort Pro and is the answer not in the manual?
Questions and answers