Devon&Devon Metropolitan Assembly Instructions Manual page 10

ASSEMBLY INSTRUCTIONS
Check that the wall and floor are perpendicular.
1
CAUTION:
AFTER REMOVING THE COMPONENTS FROM THEIR PACKING, LAY THE STRUCTURE ON THE FLOOR ON
SOME CARDBOARD OR ANOTHER MATERIAL THAT WILL KEEP THE PRODUCT INTACT.
E
N
Lay the structure on its unfinished side and screw the legs onto the structure.
2
G
18
Measure the actual length of the legs.
3
Using a level, make sure that the L-shaped bracket is positioned correctly, both
4
parallel and perpendicular to the wall. Fasten the L-shaped bracket to the wall at
the exact height determined by the distance just measured.
19
E
N
G