Motorola V51 User Manual page 85

V series gsm 900/1800 mhz
Table of Contents

Advertisement

Set In-Call Display
This feature allows you to specify whether the time or charge meters are displayed during a call.
If you do not have the Advice of Charge service, then only the time meter is available.
A
If a total charge limit has been set, then the in-call display always shows your
remaining credit.
Show Time Per Call
This option is used to display the time meter during calls. If you receive the Advice of Charge
service, only the chargeable calls will be displayed.
Show Charge Per Call, Show Total Call Charges
A
These menu items are only available if you receive the Advice of Charge service.
These options are used to display the call charges meter during and after chargeable calls. The
meter shows phone units or currency depending on the setting of the 'Set Charge Type' option.
No In-Call Display
This option switches off in-call display of the charge/time meter.
Call Charge Settings
This feature allows you to customise your Advice of Charge settings. You will be prompted to
enter your PIN2 security code before you can access the options.
A
This menu item is only available if you receive the Advice of Charge service.
Reset Call Charges
This option resets your charge meters to zero.
Set Total Charge Limit
This option sets the maximum limit for call charges; once this limit has been reached, the
network will refuse any further chargeable calls.
If you switch the charge limit
either units or currency depending on the setting of the
must be entered as whole numbers.
A
When the charge limit is On, you will not be able to make fax or data calls.
Once a limit is set, the in-call display will show the remaining credit. When you reach your last
two minutes, the warning message
warning alert will sound. The sound will be repeated when one minute remains. When the limit
is reached the message
to make any more chargeable calls.
Once the limit is reached the Total Charge Limit will need to be reset or switched off before any
chargeable calls can be made.
Off
Select
to switch off the charge limit.
On
, you will be prompted to enter a new limit. Enter the amount as
Approaching Charge Limit
Charge Limit Reached
Set Charge Type
will be displayed and a
will be displayed and you will not be able
Using the Options Menu
option. Units
79

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V8088

Table of Contents