Motorola V51 User Manual page 20

Volume Buttons
The Volume buttons are on the left-hand side of your phone, above and below the Smart
button. These buttons are used for adjusting the keypad, earpiece and ringer volume.
A volume meter will display the current volume setting. The meter will disappear after a
short time, or if you press
• To adjust the keypad and earpiece volume, press the buttons with no other features
selected.
• To adjust the ringer volume, first select the 'Adjust Ring Volume' option in the Phone
Setup Menu and then use the button to set the required volume.
The volume buttons can also be used to scroll though the Phone Book entries after pressing the
Smart button.
A
If you receive a call and you do not want to answer it immediately, you can press the
volume button to stop the phone from ringing or vibrating. This will not answer the
call.
Automatic Volume Control
If you have set the earpiece volume to maximum and the phone detects a high level of
background noise, the earpiece volume automatically increases by an additional two steps.
When the level of background noise returns to normal, the earpiece volume automatically
returns to the normal maximum.
The Start/Stop Record Button
The Start/Stop Record button (
Press it to start and stop recording VoiceNotes™.
While recording don't keep mouth piece very close to your mouth.
Using VoiceNotes™
See
The Display
The display on your phone can show alphanumeric characters as well as useful information
symbols.The various elements of the display are as follows:
ABC123
rx
k
l
n
14
About Your Phone, Battery and SIM Card
O
or
?
) is on the top of your phone.
on page 31, for more information.
Characters are used to display messages and telephone numbers.
Signal Strength. The more segments displayed in the bar graph, the better
the signal strength.
In Use. Displayed when a call is in progress.
Roam. Displayed when you are registered on a system other than your home
system.
Home Zone. Availability depends on your service provider.
C
.