Motorola V51 User Manual page 31

In-Call Menu
The "In-Call" menu provides access to additional
functionality during a call.
Entering the In-Call Menu
The "In-Call" menu is accessed by pressing the
key during a call.
$
Leaving the In-Call Menu
To leave the "In-Call" menu press the
In-Call Menu Options
The options listed in the "In-Call" menu will
dynamically change depending on the current
call state. The following list contains all of the
possible options in the "In-Call" menu.
A
Only some of the options will appear at
any given time. The order of the options
may vary.
Handsfree On/Off
This option is used to switch between Handsfree
and normal operation if the phone is installed in
a car kit that does not have an automatic
presence detector.
Hold Call
This option will put the active call on hold.
Make a New Call
This option allows you to make another call.
Restrict My Number
This option allows you to make a call without the remote user getting advanced warning of the
number.
End Active Call
This option terminates the active call, and makes the call that was previously on hold, the active
call.
End Held Call
This option will terminate a held call.
End Current And Held Call
This option will terminate all connected calls.
Switch Calls
This option allows you to switch between the active call and the call that is on hold.
Conference Call
This option connects you with up to five other telephones on one call (see
Conference Call
on page 29.)
Transfer Call
This option transfers a call to another telephone (see
C
key.
Transfer Call
Making and Receiving Phone Calls 25
Making a
, later in this section).