Motorola V190 Manual page 26

entry modes
p or m
Your Secondary text entry mode can be set to any
iTAP p or tap m mode, or set to None if you don't
want a secondary entry mode.
Numeric mode enters numbers only.
è
[
Symbol mode enters symbols only.
To set your primary and secondary text entry modes, press
M > Entry Setup in a text entry view and select Primary Setup or
Secondary Setup.
Tip: WANT TO SHOUT YOUR MESSAGE? Press 0 in a text
entry view to change text case to all capital letters (L), next
letter capital (ì), or no capitals (í).
iTAP® mode
Press # in a text entry view to switch to iTAP mode. If you
don't see j or p, press M > Entry Setup to set iTAP mode as
your primary or secondary text entry mode.
iTAP mode lets you enter words using one keypress per
letter. The iTAP software combines your keypresses into
common words, and predicts each word as you enter it.
24 basics