Table of Contents
Advertisement
Charging Your Battery Using the Travel
Charger
AYour phone's internal charger is intended only for charging
batteries. It does not provide power directly to your phone.
You can still place and answer calls while using the internal
charger, as long as the phones batteries have at least a small
charge. Remember that charging takes more time when you
are actively using the phone. To place the phone in charger-
only mode, press Á once.
! Ensure that the local main voltage at your location
matches that of your travel charger.
Install the batteries into your phone (see 'Installing the Batteries').
To charge your battery:
1 Attach the correct adapter plug to the travel charger.
ACharging will not occur if batteries are not installed
properly, or if the charger is not fully inserted.
2 Connect the travel charger to the phone.
3 Insert the travel charger plug into a suitable main power
socket.
The phone can be charged in the powered on or powered off
positions. A beep tone is heard and the battery icon flashes when
charging begins.
AWhen you begin a charge it is recommended that the
phone is fully powered on or powered off before inserting
the charger.
AThe backlight will time out after 15 seconds when your
phone is connected to an external power supply, like a
charger or vehicle accessory.
English
18
About Your Phone and Battery
AWhen charging, only the battery icon flashes. The phone
will beep on/off when the charger is connected or removed.
AThe beep-tone on the phone will not occur if the batteries
are installed improperly. The beep-tone may take two
minutes to occur with new or fully drained batteries.
The state of charging is monitored and displayed by your phone.
See 'Battery Meter Indicators' later in this section for details.
Advertisement
Table of Contents
