Page 1
CLOTHES DRYER PROJECT NAME : DV7000A MODEL CODE : DVE55A7300E/A3 DVE55A7300V/A3 DVE55A7700V/A3 DVE52A5500C/A3 DVE52A5500V/A3 DVE52A5500W/A3 DVG55A7300E/A3 DVG55A7300V/A3 DVG55A7700V/A3 DVG52A5500C/A3 DVG52A5500V/A3 DVG52A5500W/A3 MODEL NAME : DVE55A7300E DVE55A7300V DVE55A7700V DVE52A5500C DVE52A5500V DVE52A5500W DVG55A7300E DVG55A7300V DVG55A7700V DVG52A5500C DVG52A5500V DVG52A5500W SERVICE Manual C U STO M ER R EP AIR GU IDE...
This document can not be used without Samsung's authorization. 1. SAFETY INSTRUCTIONS 1-1. CAUTION FOR SAFETY DURING SERVICING 1. Do not allow the customer to repair the product. 4 The person may be injured or the product life may be shortened.
This document can not be used without Samsung's authorization. 1-2. IMPORTANT SAFETY INFORMATION To avoid risk of fire, electric shock, serious injury, when using your dryer, follow these basic precautions: 1. Read all instructions before using the dryer. 2. Install dryer according to Installation Instructions. Refer to the Grounding Instructions in the Installation Instructions for proper grounding of the dryer.
This document can not be used without Samsung's authorization. 22. Never operate the dryer with the guards and/or the panels removed. 23. Do not operate the dryer with missing or broken parts. 24. Do not bypass safety devices. 25. Keep area around the exhaust opening and adjacent surrounding areas free from accumulation of lint, dust, and dirt.
This document can not be used without Samsung's authorization. 2. FEATURES AND SPECIFICATIONS 2-1. CONCEPT ► Delicate Dry (Low Temperature dry) ► Smart Care ► Steam Sanitize+ ► Various Drying Cycles & Fuzzy Logic Algorithm ► Time Saving ► Easy Reversible Door ►...
This document can not be used without Samsung's authorization. 2-2. PRODUCT DIMENSION Type Front Loading Dryer Model DVE(G)55A7*** DVE(G)52A5*** A. Height Product-inches(mm) 45.8(1163) 44.6(1134) B. Width Product-inches(mm) 27.0 (686) Dimentions C. Depth with door open 90° Product-inches(mm) 50.1(1273) D. Depth Product-inches(mm) 30.2(768)
This document can not be used without Samsung's authorization. 2-3. SPECIFICATION Project DV7600R DV7000A Model DVE(G)50M7450* DVE(G)55A7700* DVE(G)55A7300* DVE(G)52A5500* Capacity (cu.ft / DOE) Power Resource Electric / Gas Electric / Gas Electric / Gas Electric / Gas Vent Sensor Vent Blockage Test...
This document can not be used without Samsung's authorization. 2-4. OPTIONS SPECIFICATIONS Item Code Remarks MANUAL-BOOK DC68-03784S Default Y connector DC67-00324A Short Water Hose DC97-15249A 10 _ Features and Specifications...
This document can not be used without Samsung's authorization. 2-5. CONTROL PANEL ► DVE55A7**** ► DVG55A7**** ► DVE52A5**** ► DVG52A5**** Features and Specifications _ 11...
Page 11
This document can not be used without Samsung's authorization. Turn the Cycle Selector to select the desired cycle. The indicator by the cycle name lights up. • Steam Cycles : The dryer sprays water into the drum to deodorize clothes and reduce static 01 Cycle Selector electricity and wrinkles.
This document can not be used without Samsung's authorization. 2-6. CYCLE OVERVIEW Cycle Description For most fabrics including cottons and linens. NORMAL If Normal is selected, the Eco Dry function is enabled by default. For more information, see Eco Dry in the “Control panel” section.
This document can not be used without Samsung's authorization. 3. DISASSEMBLY AND REASSEMBLY 3-1. TOOLS FOR DISASSEMBLY AND REASSEMBLY Tool Type Remarks Socket set with 14 mm Fan (2) 6” extention Tool to protect the idle and abrasion of the bolt Vice pliers for the box driver.
This document can not be used without Samsung's authorization. 3-2. STANDARD DISASSEMBLY DRAWINGS To avoid risk of electrical shock, personal injury or death, disconnect the power to the Clothes Dryer. ► This is a standard disassembly diagram and may differ from the actual product. Use this material as a reference when disassembling and reassembling the product.
Page 15
This document can not be used without Samsung's authorization. Part Name Figure Description 1. U nplug the power cord of the dryer. 2. Remove the four hinge screws from the door, and then remove the door by lifting it up slightly. 3. Remove the two screws from the lever holder, and then remove the holder cover.
Page 16
This document can not be used without Samsung's authorization. Part Name Figure Description 7. Remove the glass holder, and switch the positions of : a. the hinge cover and the door handle. b. the hinge holder and the glass-guide holder.
Page 17
This document can not be used without Samsung's authorization. Part Name Figure Description 1. Unplug the unit. 2. Remove Top Cover. 3. Remove Control Panel. 4. Remove Frame Front. Drum Front 5. Remove Plate(U) 6. Remove Drum Front retaining 5 screws.
Page 18
This document can not be used without Samsung's authorization. Part Name Figure Description 1. Disconnect Power Supply to Unit. 2. Remove Top Cover, Console, Front Panel, Plate(u), Drum Front. 3. Remove Belt. Drum 4. Lift Drum and Pull out. Carefully spread the cabinet as needed to get extra clearance. But, be careful not to damage the cabinet.
Page 19
This document can not be used without Samsung's authorization. Part Name Figure Description ① ② ③ 1. After remove Drum, do the following. 2. Remove the 2 screws from Duct Connector. 3. Separate Duct Connector. 4. Remove 1 Housing Motor.
Page 20
This document can not be used without Samsung's authorization. Part Name Figure Description 1. After the knock-down to Motor/Assy-Motor, do the following. 2. Shut off gas supply. 3. Disconnect gas pipe. 4. Remove all the connectors. 5. Remove two screws (one at the front and the other Burner one at the back) securing Burner to Frame.
Page 21
This document can not be used without Samsung's authorization. Part Name Figure Description 1. Unplug the unit. 2. Remove Top Cover. Thermistor 3. Remove 1 screw from the Assy Drum Back. To remove the screw, use long tools. Sensors 1. Remove each securing screws to remove each of (Thermostat, the sensors.
This document can not be used without Samsung's authorization. 4. TROUBLESHOOTING 4-1. ERROR ITEMS AND DIAGNOSTIC CODES An occurrence of an Error will make a sound of error melody for 5sec and continuously show one of the Error Displays. Information...
4-2-2. Smart Care To enable this function, you must first download the Samsung Smart Washer/Dryer app at the Play Store or the App Store and install it on a mobile device featuring a camera function. The Smart Care function has been optimized for Galaxy &...
Page 24
This document can not be used without Samsung's authorization. 4-2-5. CLEANING ■ Feature Panel • Clean with a soft, damp cloth. Do not use abrasive substances. • Do not spray liquid cleaning agents directly on the display of the dryer.
This document can not be used without Samsung's authorization. 4-2-7. Smart Install • Smart Install allows service personnel to check if the dryer is installed properly. Mode How to enter Press and hold the Turn on the dryer A message of "AS" appears...
Page 26
This document can not be used without Samsung's authorization. ■ Step 3. Check the result When the test is complete, the results are displayed and the dryer sounds a tone. Warning Code Description Guide C8 or C80 About 80% of the vent is clogged...
This document can not be used without Samsung's authorization. 4-3. TROUBLESHOOTING Problem Action • Make sure the door is latched shut. • Make sure the power cord is plugged into a live electrical outlet. Does Not Run. • Check your home’s circuit breakers or fuses.
Page 28
This document can not be used without Samsung's authorization. Problem Action Water drips from the • This is steam condensation. nozzle when the Steam • The dripping water will stop after a short time. cycles starts. Sprayed water is not visible during Steam •...
This document can not be used without Samsung's authorization. 4-4. COMPONENT TESTING PROCEDURES Part Name Image Description Electric THERMISTOR THERMOSTAT1 • Thermistor resistance 10K Ω @ 25°C (77°F) Thermistor Thermostat • Thermostat 1 resistance < 1Ω 85˚C, 25A Thermal cut-Off •...
Page 30
This document can not be used without Samsung's authorization. Part Name Image Description • Belt Cut-off S/W Belt Cut-off S/W - Lever open: Resistance value < 1Ω - Lever push: Resistance value: ∞ Ω Belt Cut-Off Switch 125V, 16A •...
This document can not be used without Samsung's authorization. Part Name Image Description • Valve 1-2: Resistance value approx. 1365Ω • Valve 1-3: Resistance value approx. 560Ω Gas Valve • Valve 4-5: Resistance value approx. 1325Ω (25M01A) • Valve 6-7: Resistance value approx. 1000Ω...
Need help?
Do you have a question about the DV7000A and is the answer not in the manual?
Questions and answers