Sencor SVC 1010 User Manual page 11

Vacuum Cleaner
SVC 1010 / 1011BL / 1011GR (Forte)
Cover of the outflow micro-
filter
Guide lug
outflow micro-filter
1) First remove the grill of the inflow filter by pulling upwards in the place of both safety locks.
2) Then remove the outflow filter and replace with a new one.
3) Insert the new output filter back into the vacuum cleaner so that the lug fits into the slit for the filter in the
vacuum cleaner and cover with the grill (first insert the grill in the backward direction and then click in both
safety locks).
Caution:
Insert the ouflow filter into the vacuum cleaner with the plastic grill facing out!
Cleaning your vacuum cleaner
To clean the outer parts of the product, use a soft cloth dipped in lukewarm water. Do not use aggressive cleaning
agents, paint thinners or solvents. Using these solutions could damage the surface of the product.
EN-11
Copyright O 2012, Fast CR, a.s. Revision 05/2012