Canon PIXMA iP5300 Quick Start Manual page 20

Layout and Trimming Settings
If these settings are set to Default (the setting to follow that of the printer) on the PictBridge
compliant device, Borderless is applied for Layout and Off (No trimming) is applied for
Trimming.
When printing onto Photo Stickers (PS-101), select N-up for Layout, then select 16-up.
* Some PictBridge compliant devices may display the Layout option 2-up, 4-up, 9-up, and
16-up. In this case always select 16-up.
* If there are no options on the PictBridge compliant device that correspond to 16-up,
printing on stickers is not possible.
* When printing on Photo Stickers (PS-101), do not set Layout to Borderless.
Image Optimize Setting
If Image optimize is set to Default (the setting to follow that of the printer) on the PictBridge
compliant device, Exif Print is applied.
If you are using a Canon-brand PictBridge compatible device, additional options of Red eye,
VIVID, NR, or Face may be available, depending on the model.
* Red eye corrects eyes that look red.
VIVID prints green and blue portions of photos more vividly.
NR (Noise Reduction) reduces noise in blue portions, such as the sky, and dark portions.
Face corrects the contrast of backlit images.
Date/File No. Print Setting
If Date/File No. print is set to Default (the setting to follow that of the printer) on the
PictBridge compliant device, Off is applied.
If the images already have dates superimposed when shot, set this PictBridge setting item to
Off. If you select Date, File No., or Both, the date and/or file number will be printed over the
date printed by the camera's function.
16 Printing Photographs Directly from a Compliant Device