SETTING THE TIME WINDING POSITION Rotate the crown counter-clockwise to unscrew it. Rotate clockwise to wind the watch. 40 turns will bring it to a UNSCREW FIRST full-wind state. THEN PULL *click* TIME SET POSITION (NO DATE) / DATE SET POSITION Gently pull out the crown to Position 2 to set the time.
Page 3
OPERATING THE TIMING BEZEL (ELAPSED TIME) TURN The timing bezel rotates counter-clockwise. Simply turn the bezel triangle to the current posi- tion of the minute hand in order to show elapsed ELAPSED TIME time. NOTE: Please do not force the bezel to turn clockwise as it will break the mechanism.
Page 4
RESIZING/CHANGING THE BRACELET MICROADJUSTMENT SIZING WITH LINKS CHANGING STRAPS Use the round end of a Use the screwdriver to Use the strap changing tool strap changing tool (not remove and replace links as (not included) to remove included) to push in the needed.
Page 5
* Always have the crown fully secured before submerging into water. ** Do NOT attempt to open caseback without prior approval from Lorier, as this will void your warranty. * Do NOT use liquids containing alcohol to clean your watch. Warm water will suffice.
Need help?
Do you have a question about the NEPTUNE SIV and is the answer not in the manual?
Questions and answers