Download Print this page

Lorier HYDRA Owner's Manual

Download this manual

HYDRA

OWNER'S MANUAL

Page 1 HYDRA OWNER’S MANUAL...
Page 2: Setting The Time
SETTING THE TIME WINDING POSITION Rotate the crown counter-clockwise to unscrew it. The crown will “pop” out once fully unscrewed. Rotate clock- UNSCREW FIRST wise to wind the watch. 40 turns will bring it to a full-wind THEN PULL state. *pop* *click* *click*...
Page 3 RESIZING/CHANGING THE BRACELET MICROADJUSTMENT SIZING WITH LINKS CHANGING STRAPS Use the round end of Use the screwdriver to Use the strap changing tool the strap changing tool remove and replace links as to remove and replace the to push in the clasp needed.
Page 4 OPERATING THE TIMING BEZEL (ELAPSED MINUTES) TURN The timing bezel rotates counter-clockwise. Simply turn the bezel triangle to the current posi- tion of the minute hand in order to show elapsed time. ELAPSED MINUTES NOTE: Please do not force the bezel to turn clockwise as it will break the mechanism.
Page 5 OPERATING THE TIMING BEZEL (TRACKING A SECOND TIME ZONE) TURN The timing bezel rotates counter-clockwise. To track a second time zone, use the bezel markers as a second set of hour markers. In the illustration, it is 10 o’clock in time zone A, as indicated on the dial, and 12 o’clock in time...
Page 6 * Do not attempt to open caseback without prior approval from Lorier, as this will void your warranty. * Scratches on the crystal can be buffed out using a soft cloth and a polishing compound such as Polywatch (not included). In a pinch, toothpaste will do as well.