Advertisement
Quick Links
The Yale Smart Door Sensor Kit monitors the door lock status and the opening / closing of the door.
3
1
4
2
5
Identifying the parts
1. Smart Module
2. Module retaining screw
3. Magnet sensor
4. Red/Green LED Indicator
5. Learn Button
6. Battery location
7. Lock Sensor Cable connector
8. PVCu Door Frame Magnet Sensor
9. Composite / Timber Door Frame Magnet Sensor
10. Two x CR2032 3V Lithium batteries
11. Yale Home Hub
LED Indicator
In Normal Operation Mode, the Red LED indicator remains off except in the following situations:
• When the Door Sensor is activated under Tamper or Low battery conditions.
• When the Door Contact is activated under Learn Mode.
If the Red LED flashes to indicate signal transmission, the Green LED will flash rapidly upon receiving acknowledgement
from the Yale Home Hub.
Yale Smart Door Sensor Kit Manual
8
7
6
Surface treatment:
Material:
General tolerance:
ISO 8015
ISO 2768-mH
Volume:
Mass:
Surface area:
Created (YYYY-MM-DD):
Designed by:
Drawn by:
Scale:
Projection:
2:1 (A4)
1075.29 mm³
1.08 gram
1761.05 mm²
Alternate ID
Document ID
Configuration:Default
SHEET 1 OF 1
9
1 x Siren
10
Rev.:
1
IA-301
11
Yale Home Hub x 1
Advertisement
Related Manuals for Yale IA-301
Summary of Contents for Yale IA-301
- Page 1 Yale Smart Door Sensor Kit Manual IA-301 The Yale Smart Door Sensor Kit monitors the door lock status and the opening / closing of the door. 1 x Siren Yale Home Hub x 1 Surface treatment: Material: General tolerance: ISO 8015...
- Page 2 LED indicator will turn on upon triggering. Upon each press on the Learn button, the Door Sensor will transmit a test sig- nal to the Yale Home Hub for a radio range test and resets the Learn Mode back to the 3-minute duration. It will exit Test Mode automatically after 3 minutes and return to Normal Operation Mode.
- Page 3 95 to 115 minutes in Normal Operation Mode. If the Yale Home Hub has not received the signal from the Door Sensor for a preset period of time, the Yale Home Hub will indicate that particular Door Sensor is experiencing an out of signal problem.
Need help?
Do you have a question about the IA-301 and is the answer not in the manual?
Questions and answers