Using The Cleaning Head And Accessory Nozzles - AEG VAMPYR 5 COMPACT Series Operating Instructions Manual

1
Connecting the suction hose
insert the hose holder into the suction opening.
When the hose is to be disconnected from the
appliance, press the release button and pull the
hose holder out of the suction opening.
- Mains connection/Flex rewind
The mains cable is located in the cable compart-
ment. Press the foot bution for the cable, and pull the
cable out Insert the plug into the socket.
Atthe end of vacuuming switch offand pull the plug
outefthe socket. Press the flex rewind bution and the
cable rewinds automatically.
Using the cleaning head and
accessory nozzles
The cleaning head and nozzles are attached to the
'suction tube by pushing and twisting, and taken
apart again by twisting and pulling.
(or
Using the cleaner head VARIO 4000
The cleaner heaz is universally suitable for everyday
cleaning of carpets and hard flooring, such as
wooden parquet flooring, ceramic filling, linoleum
tc. There is no need to manually adjust the cleaner
head to suit different floor types.
Four rojlers, as well as 2 wheels at the back of the
cleaner head, give the VARIO 4000 extremely good
manoeuvrability. Even sideways movements are
possible.
The rollers ensure a constant distance between the
floor and the underside of the cleaner head. This
allows even scratch prone wooden flooring to be
cleaned.
Accessory Nozzles - Crevice and Upholstery
(depending on model)
The integrated accessoriss compartment contains:
2 nozzles - crevice and upholstery. Open the com-
pariment by. pressing the button vertically down-
wards,
'The nazzles can be aitached to the suctions tubee as
well as the handle of the suctions hose.
Crevice Nozzle
For vacuurning in those normally inaccessible
places i.e. reaching cobwebs, or down the side of
asotal
13