Using The Face Self-Timer - Canon IXUS 200 IS User Manual

Using the Face Self-Timer

Once you compose the shot, such as for a group photo, press the shutter
button, and enter the composition, the camera will take three shots in a row
two seconds after it detects your face
What if a face is not detected?
Even if your face is not detected after joining the subjects, the shutter will release
approximately 30 seconds later.
64
(p. 82).
Choose ".
●
Follow Step 2 on
Compose the shot and press the
shutter button halfway.
●
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp will blink and the self-timer
sound will play.
Join the subjects and look at the
camera.
When the camera detects a new face, the
lamp and sound will speed up (the lamp
remains lit when the flash will fire), and
two seconds later the shutter will release.
●
To cancel the self-timer after it has
started, press the o button.
The second and third shots will continue in
succession.
●
To restore the original setting, choose
in Step 2 on p.
and choose ".
p. 63
63.