Related Manuals for Ikan M19W-NDI
Summary of Contents for Ikan M19W-NDI
- Page 1 M19W-NDI 19" PoE++ Monitor w/ Full NDI Encoding/Decoding & NDI Tally Light User Manual Read this manual carefully before using the monitor Version 1.0...
-
Page 2: Table Of Contents
Table of Contents Safety Precautions On Installation Transporting the Unit Handling and Maintenance of the Screen On Repacking General Warning Power Connection Warning Usage Warning Product Overview What’s in the box Overview Product features Location and Function of Parts and Controls Front Panel Rear Panel On Screen Display... - Page 3 Encoding Decoding Network System NDI Tally Feature How It Works: Setup Instructions: Tally Light Selection: Benefits: Notes: Dimensions (mm) Ikan Corporation Website: www.ikancorp.com Phone: (713) 272-8822 Email: support@ikancorp.com Address: 10207 S Sam Houston Pkwy W, Suite 140, Houston, TX 77071...
-
Page 4: Safety Precautions
Safety Precautions On Installation Make sure there is enough airflow to prevent internal overheating. Do not place the device near heat sources such as radiators or air ducts, or in areas exposed to excessive dust, mechanical vibrations, or shocks. Keep at least 40 cm of space behind the unit to maintain a safe operating area. -
Page 5: On Repacking
On Repacking Do not throw away the carton and packing materials. They make an ideal container which to transport the unit. General Warning • Avoid placing the monitor in a rainy or wet environment to prevent the risk of fire or electrical shock. •... -
Page 6: Product Overview
Overview The M19W-NDI High-Bright Monitor features NDI-HB video encoding/decoding, as well as traditional 3G-SDI, HDMI, and VGA, inputs. The M19W-NDI monitor can be connected to a network and powered using a single Ethernet cable, eliminating the need for dedicated video and power cables. The is possible because the monitor utilizes PoE++ technology that allows both power and NDI data to be transmitted through a single Ethernet cable. -
Page 7: Location And Function Of Parts And Controls
Location and Function of Parts and Controls Front Panel Tally light: Turns red, green, or yellow Tally light switcher: Switches between front facing tally light or top tally light Screw for acrylic screen protector: If you do not want to use the acrylic screen protector, unfasten these screws to remove it. -
Page 8: Rear Panel
Location and Function of Parts and Controls Rear Panel TALLY NDI/PoE++ Input: RJ45 Connector | This port is used for both PoE and NDI SDI Input: BNC 3G-SDI Connector 12V~24V Power Input: Threaded barrel power connector HDMI Input: VGA Input: DE-15 Connector AV Input: BNC Composite Connector Tally Input: RJ45 Connector | Contact closure GPIO tally interface (Do not use this Port for PoE or NDI) -
Page 9: On Screen Display
On Screen Display MAIN MENU OUTPUT SETUP IMAGE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - CONTRAST OUTPUT SETUP... - Page 10 System • Input Format: Display current input resolution and refresh rate. • F/W Version: Show firmware version. • Factory Reset: Reset to default settings. • LCD Sleep: Set inactivity timer for sleep mode. • Button LED: Toggle LED lights on front panel buttons. •...
-
Page 11: Getting Started
Getting Started Powering the Monitor Via PoE+ (Power over Ethernet) 1. Connect an Ethernet cable from the NDI PoE port to a PoE+ enabled network switch or injector. 2. This provides both power and network connectivity for NDI streaming. Via 12-24V DC Power 1. -
Page 12: Using The Monitor
Using the Monitor Selecting Video Inputs Use the input selection buttons on the front panel to switch between video sources: • Press NDI, SDI, HDMI, VGA, or AV to select the corresponding input. Image Flip and Orientation Press the Flip button to toggle the image flip mode. Set the desired orientation in the H/V Mirror section of the OSD menu. -
Page 13: Ndi Functionality
NDI Functionality NDI Encoding Mode When a baseband signal (HDMI, SDI, VGA, Composite) is connected and selected, the monitor can encode and broadcast it as a 1080p NDI stream over the network. NDI Decoding Mode The monitor can decode any 1080p high-bandwidth NDI stream and display it on the screen. -
Page 14: Web Gui Access And Configuration
Web GUI Access and Configuration Accessing the Web GUI 1. Connect to the Same Network • Ensure your computer is connected to the same network as the NDI monitor. • Make sure that your firewall is turned o� or configured properly to open TCP and UDP ports (5960-5970) that allow NDI video and audio to pass through. -
Page 15: Web Gui Overview
Web GUI Overview Encoding NDI Settings 1. NDI Device Name: Set the device name visible to other NDI devices. 2. NDI Channel Name: Set the channel name for the encoded stream. 3. Encoding Quality: Adjust from 51% to 99% for desired video quality. Current Input 4. -
Page 16: Decoding
Decoding NDI Sources 1. Displays all available NDI streams on the network. 2. For devices with multiple streams, click the drop-down arrow to view all streams. 3. Click the Monitor icon to display the stream immediately. 4. Click the Plus icon to assign the stream to an NDI preset. Current Output 5. -
Page 17: Network
Network Network Settings 1. Choose between DHCP or Static IP configuration. IP Configuration 2. If using a static IP, set the IP Address, Subnet Mask, and Gateway Address. -
Page 18: System
System Firmware Updates 1. Update the firmware for the FPGA and system chips. System Configuration 2. Switch between Encoding and Decoding modes. Change Password 3. Update the login credentials for the Web GUI. Reboot 4. Perform a software reboot of the monitor. Factory Reset 5. -
Page 19: Ndi Tally Feature
NDI Tally Feature The M19W-NDI monitor's tally light system is fully compatible with High Bandwidth NDI®, providing seamless integration with NDI-enabled video mixing software like vMix. When you're using the monitor in NDI Encoding Mode, the NDI stream generated by the monitor can be received by your mixing software over the network. -
Page 20: Tally Light Selection
▪ Check the monitor's IP address in the OSD menu under System > NDI IP if you experience connectivity issues. By utilizing the NDI Tally Feature, the M19W-NDI monitor not only serves as a high-quality display but also enhances on-set communication, making it an... -
Page 21: Dimensions (Mm)
Dimensions (mm) 446.63 14.54 39.63 73.7... -
Page 22: Specifications
Specifications M19W-NDI Specifications Model M19W-NDI Aspect Ratio 16:9 Maximum Brightness 1000 cd/m2 Screen Size (Diagonal) 18.5 in. Mount VESA 100mm Video Inputs SDI, HDMI, VGA Input Voltage DC 12v / 5A Power Consumption Weight of Monitor 5.73 lbs. Product Dimensions 18.3"... - Page 23 • CE • UKCA Warranty Information Ikan Corporation provides a limited warranty for the M19W-NDI Monitor. Please refer to the warranty card included in the package or visit our website for detailed terms and conditions. Contact Information For technical support, please contact: Ikan Corporation Website: www.ikancorp.com...
Need help?
Do you have a question about the M19W-NDI and is the answer not in the manual?
Questions and answers