Canon ES8600 Instruction Manual page 57

How much power is left?
The indicator in the display shows you approximately how
much charge the battery pack has left (when a battery
pack is directly attached to the camera):
Notes:
• The mark starts blinking in the display when the
power is completely exhausted.
• The indicator is not constant — it varies with the
condition under which battery pack and camcorder are
used.
When to recharge
You can recharge a lithium ion battery pack whenever it is convenient. Unlike a conventional
battery pack, it does not have to be fully discharged first. However, as the battery pack will
naturally discharge itself over time, it is best to charge it the same day you plan to use it, or the
day before.
Taking care of the battery pack
Always attach the terminal cover.
• Do not allow any metal objects to touch the
terminals, as this can cause a short circuit and
damage the battery pack. Attach the terminal cover
whenever the battery pack is not being used.
Keep the terminals clean.
• The camera, adapter or battery pack will not work
properly if the terminals are dirty. Check them
before use, and wipe them with a dry cloth or
tissue if necessary.
Storing the battery pack.
• If you do not use a battery pack for a period of more than a few months any remaining charge
may cause damage to the battery pack, and reduce usage time. To prevent damage therefore,
aim to use a battery pack's complete charge before storage.
• If you have some battery packs, do these things at the same time for them.
• Store the battery pack in an area which is free of moisture and where the temperature is no
higher than 86°F (30°C).
100%
↓
↓
↓
↓
0%
E
57