Using The Lcd Screen - Canon ES8600 Instruction Manual

Using the LCD Screen

Open the LCD screen
Push the OPEN button and open the panel by
pulling it away from the camera. This
automatically switches the LCD screen on and
the viewfinder off. When you close the LCD
panel, the LCD screen automatically switches
off and the viewfinder switches back on.
Changing the angle of the LCD screen
First open out the LCD panel at a right angle
(90°) to the camera.
You can now choose the angle of the panel
that suits you best by rotating it about this
axis.
If you rotate the panel around to 180° so that it
faces the direction of the lens you can allow
the subject to monitor the shot in the LCD
screen or you can include yourself in the
picture (p. 21). The viewfinder is also activated
when the panel is in this position.
From this position you may also push the
panel flat against the camera until it is flush
with the side, with the screen facing outwards.
90°
90°
180°
E
19