Page 1
PB74 Power Base User Manual Thank you for choosing COLBOR product. Please read this manual carefully before use and follow all instructions mentioned herein.
Caring For Your COLBOR Product · Please keep the product in a dry, clean, dust-free environment. · Keep corrosive chemicals, liquids, and heat sources away from the product to prevent mechanical damage. · Use only a soft and dry cloth for cleaning the product.
Page 3
Operation Instructions 1. Charging Please use the single-port fast charger which supports a voltage of 20V and an output power of PD45W or higher. * According to USB-IF, only fast chargers with PD45W or higher can provide a 20V output. Chargers with less than PD45W cannot charge the PB74.
Page 4
Note: The PB74 is only for powering W60/W60R/W100/W100R lights (Hardware VER. "1") and devices below 60W (20V⎓3A). Please contact your local agent or COLBOR’s customer service (support@ colborlight.com) to verify if your light is compatible with the PB74. Power On Slide the On/Off toggle to the middle position.
Page 5
Four indicator lights indicate the battery of less than 20%, 20%-40%, 40%-70%, and 70%-100% with the number of lights indicating the corresponding battery level. If only one light is on and flashing rapidly, the battery is nearly depleted. less than 20% 20%-40% 40%-70% 70%-100%...
3.If the COLBOR product is out of the warranty coverage, the service and the parts cost will be charged. Guangzhou Zhiying Technology Co., Ltd Room 2401, 24 / F, South Tower, Lisheng Plaza, No.
Need help?
Do you have a question about the Power Base PB74 and is the answer not in the manual?
Questions and answers