Related Manuals for COLBOR CL220
Summary of Contents for COLBOR CL220
- Page 1 CL220 Video Light User Manual Thank you for choosing COLBOR product. Please read this manual carefully before use and follow all instructions mentioned herein.
-
Page 2: Power Connection
Caring For Your COLBOR Product Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage. The product is not waterproof. Do not leave the product unattended while in use. Keep out of reach of children. -
Page 3: Product Instructions
Product Instructions ① LED Display Screen ⑪ COB Lamp Beads ② EFF Mode Button ⑫ Lamp Angle Adjustment Locking Grip ③ EFF Rate Option Button ⑬ Bracket ④ Color Temperature Option Button ⑭ Air Outlet ⑤ Setting Button ⑮ NATO Slideway ⑥... - Page 4 3. Installation and fixation of light Rotate the lamp holder screw until the inner wall not shielded and put the product on the top of the lamp holder to tighten the bracket screw for fixation. Adjust the lamp body irradiation Angle and tighten the lamp holder Angle grip fixed.
- Page 5 (4) Power with V-port battery Mount the V-port battery to the lamp by complimentary the NATO expansion bar with VM3 (optional), and then connect the D-tap to XLR power cable to start the lamp. Note: * For one 14.8V battery powering, the maximum brightness is 50% of full power.
- Page 6 Operation Instructions 1. Please remove the COB protective cover before using the light. 2. Turn on the lamp: After confirming that the power connection is normal, press the switch to "-", and the screen will display the brand and product module, and then enter the operation interface.
- Page 7 2. CCT Mode (Short press CCT Mode Button to enter) CCT Mode Button Brightness Color Temperature Color Temperature Control Knob Turn the knob clockwise or anti-clockwise to adjust color temperature (CCT) from 2700K~6500K Press down the knob to quickly switch the preset color temperature to 2700K, 3200K, 4000K, 5600K, and 6500K Brightness Control Knob Turn the knob clockwise or anti-clockwise to adjust brightness (DIM)
- Page 8 3. EFF Mode (Short press EFF Mode Button to enter) EFF Mode Button Rate Special Effect Brightness Rate Option Button Color Temperature Color Temperature Control Knob Turn the knob clockwise or anti-clockwise to adjust color temperature (CCT) from 2700K~6500K Press down the knob to quickly switch the preset color temperature to 2700K, 3200K, 4000K, 5600K, and 6500K Brightness Control Knob Turn the knob clockwise or anti-clockwise to adjust brightness (DIM)
- Page 9 4. Setting 1. Short press the setting botton to enter settings menu. 2. Turn the brightness control knob clockwise or anti-clockwise to choose setting. 3. Press the setting botton to adjust corresponding setting (Short press the setting botton to adjust the wireless connection mode). Settings Options APP/Remote Control...
- Page 10 5. APP Connection & Light Control Scan the QR code，or search “COLBOR STUDIO" in app store to download the app for light control. CL220 Pairing: 1. Press the setting button and enter the pairing mode. Short press the setting button to choose “APP”, then long press the setting button for 3 seconds for...
- Page 11 2. Open the APP and click the “ + " on the upper right, then click the scene one and click the + on the upper right. Showing CL220 means successfully pairing.
- Page 12 3. Click the CL220 for control.
- Page 13 CL220 Group Control: 1. After successfully pairing the CL220, click the group then click the“ + " on the top right. Choose the light for grouping and click the confirm bottom. Showing Group One means successfully grouping. 2. Click the group for lighting control.
-
Page 14: Specifications
Equipped with a NATO extension bar and an NQD quick-release device, the lights can be spliced together, and up to three lights can be spliced. Specifications Color Rendering Index Color Temperature Range 2700K-6500K (±200K） Beam Angle ≈∠ 120° Reflector ≈∠ 45° Illumination See the Form 1 Below COB Output Power... -
Page 15: Package List
3.Modifications to a product by its user or a third party without prior written consent of COLBOR, e.g. replacement of element or circuit, label alteration 4.The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off 5.All consumable accessory attached to a product, like cable, cover... - Page 16 2.Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided. 3.If the COLBOR product is out of the warranty coverage, the service and the parts cost will be charged. Form 1...
Need help?
Do you have a question about the CL220 and is the answer not in the manual?
Questions and answers