Subscribe to Our Youtube Channel
Related Manuals for COLBOR W100R
Summary of Contents for COLBOR W100R
- Page 1 W100R Video Light User Manual Thank you for choosing COLBOR product. Please read this manual carefully before use and follow all instructions mentioned herein.
- Page 2 Note： Please use the included power adapter to avoid damage. When powering via the COLBOR POWER GRIP, use the D-Tap to DC cable to connect the D-Tap port on the battery and the DC port on the light. Please do not use the Type-C port on the battery for powering.
-
Page 3: Product Instructions
⑭ DC Port Light Installation 1. Removal of COB protection cover Hold the COB cover with the COLBOR Mount tenon and rotate it as the direction of the arrow. Note: Be sure to remove cob protective cover and cob protective film... - Page 4 Do not suspend the power adapter in the air. Use wire rings to hang it on the lamp stand. (2) Power with COLBOR Power Grip Secure the battery handle with the light body's 1/4” screw hole at the top and...
- Page 5 Operation Instructions 1. Power On/Off Power On：Connect to the power source then long press the power button. Power Off：Long-press the power button to turn off. 2. CCT/HSI Mode Switching Long press the knob to switch the menu between CCT/HSI. 3. Brightness Adjustment Roll the wheel for adjustment.
- Page 6 7. Status Icon Description ① APP Connection Status Icon 2.4GHz Control Mode, available for controlling via CTRL1 remote. APP Control Mode, available for controlling via COLBOR Studio APP. ② Fan Status Icon Smart Mode. The product will adjust the fan speed according to the internal detected temperature to ensure that it is in optimal working condition.
-
Page 7: Wireless Connection
Short press the remote control button to switch between 2.4GHz (CTRL1 remote) and APP (COLBOR Studio APP) control modes, then long-press the button to start pairing. 1. APP Connection & Operation Scan or search in the app store to download the COLBOR STUDIO for further functions. - Page 8 ① Short press the Wireless Control Setting Button to switch to APP Connection Mode (Shows the Icon )and long press to start pairing, once the icon flashes, the light is in connection mode. ② Open the COLBOR STUDIO APP and click“Add Fixtures", and find the W light to confirm adding it.
- Page 9 (2) NFC Connection Tag your phone's NFC sensing area close to the light's NFC logo. A prompt will automatically appear on your phone to open the APP. Click the prompt to open the APP. * If the app has not been installed, a prompt to install will appear. Click the prompt to enter the app download page on the official site or the APP store.
- Page 10 (3) APP User Manual Click to open the page to check for more information. Graphic: https://www.colborlight.com/pages/cb-studio-help-center Video: https://youtu.be/SYEqPTvuy3M 2. Remote Connection ① Short press the Wireless Control Setting Button to switch to 2.4G Connection Mode (Shows the Icon ) and long press to start pairing, once the icon flashes, the light is in connection mode.
-
Page 11: Specifications
PC+ABS Light Dimension 157*43*93mm Light Weight 345g Operating Temperature -10~40℃ Packing List W100R Video Light x1 Plum Tail Cable x1 Power Adapter (with Wire Lanyard) x1 Reflector x1 COB Cover x1 Dome x1 Warranty Card x1 Power adapters may vary according to sales region. - Page 12 Form 1 Illumination Light Base 2860 2700K Reflector 5280 Light Base 3060 3200K Reflector 5630 Light Base 3400 4300K Reflector 6220 Light Base 3570 5600K Reflector 6500 Light Base 3600 6500K Reflector 6520 Light Base Reflector Light Base 1070 Reflector 1550 Light Base Reflector...
- Page 13 3.If the COLBOR product is out of the warranty coverage, the service and the parts cost will be charged. Guangzhou Zhiying Technology Co., Ltd Room 2401, 24 / F, South Tower, Lisheng Plaza, No.
Need help?
Do you have a question about the W100R and is the answer not in the manual?
Questions and answers