Advertisement
Advertisement
Table of Contents
Related Manuals for VALERA Regenera AI
Summary of Contents for VALERA Regenera AI
- Page 1 REGENERA AI QUICK START GUIDE...
- Page 2 REGENERA AI Auto check AUTO CHECK DIAGNOSTIC Turbo Booster TURBO BOOSTER m³/h CARE Dual Setting DUAL SETTING CARE & MAX Dual Setting DUAL SETTING CARE & MAX Diffuser Setting Clean Filter Manual Cleaning CLEAN FILTER MANUAL Diagnostics 1/2 Diagnostics 2/2...
-
Page 3: Auto Check
Auto check AUTO CHECK DIAGNOSTIC The hairdryer automatically performs a self-test cycle of its functions when the plug is inserted and when it is switched off. Plug-in/Check Each time the plug is reinserted into the socket (at least 20 seconds after the last time it was removed), the hairdryer automatically checks its functions. - Page 4 Turbo Booster TURBO BOOSTER m³/h The function provides extra power during drying and styling. Press You can instantly increase the airflow by holding down the TURBO BOOSTER button. The airflow is increased to approx. 90 m /h, even if the hairdryer is already running at approx.
- Page 5 CARE Dual Setting DUAL SETTING CARE & MAX For hair type appropriate treatment two settings - CARE and MAX - are available, each with 9 combinations of temperature and airflow, 18 in total. CARE For fine, delicate or coloured hair. 9 balanced, gradually increasing combinations.
- Page 6 Dual Setting DUAL SETTING CARE & MAX For hair type appropriate treatment two settings - CARE and MAX - are available, each with 9 combinations of temperature and airflow, 18 in total. For strong, thick hair. Temperature, set at a higher level, and airflow are separately adjustable in 9 combinations.
- Page 7 Diffuser Setting For optimum drying and styling with the diffuser, we recommend the CARE CARE setting with the combination: Fan level 1 Temperature level 3...
-
Page 8: Clean Filter
Clean Filter Filter cleaning function by reversing the airflow direction. Indicator light After around 20 hours of hairdryer operation, the "CLEAN FILTER" LED light flashes orange. Start cleaning Keep the "CLEAN FILTER" button pressed for at least 2 seconds, and filter cleaning will start automatically. -
Page 9: Manual Cleaning
Manual Cleaning CLEAN FILTER MANUAL The air intake filter must always be kept free of impurities. In addition to the programmed self-cleaning function, frequent manual cleaning is recommended. Remove The filter can be removed by turning it slightly counterclockwise. Brush Remove dust and hair with a cleaning brush. -
Page 10: Reset Appliance
Diagnostics 1/2 If the hairdryer locks, the LED lights identify the problem. Hardware protection Software protection against current peaks against current peaks Overcurrent Low voltage Reset appliance • Switch off the hairdryer • Pull the plug out of the socket •... - Page 11 Diagnostics 2/2 If the hairdryer locks, the LED lights identify the problem. Motor blocked Phase anomaly Other The hairdryer must undergo maintenance in a Valera service centre.
Need help?
Do you have a question about the Regenera AI and is the answer not in the manual?
Questions and answers