Audio Setup - Daewoo SH-3510P Instruction Manual

Audio Setup

A user may select an audio menu according to the speaker set being used.
1
While in STOP or RESUME STOP mode,
press [SETUP] button.
Select a Digital Output.
2
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
• BITSTREAM : The raw audio signal
• LPCM : The decoded audio signal goes
Select a Dynamic Range.
3
You can set the Dynamic Range as follows:
• Off : You can hear the sound as it was
• Full : You can hear loud sounds softer
recorded on the disc goes to the digital
audio output.
to the digital audio output.
originally recorded on the disc.
and soft sounds louder.
DIGITAL OUT BITSTREAM
DYNAMIC RANGE OFF
DIGITAL OUT BITSTREAM
DYNAMIC RANGE LPCM
DIGITAL OUT
DYNAMIC RANGE FULL
OFF
51