E Connecting To A Tv And An Av Receiver Equipped With A Dts Decoder - Aiwa XD-SPM823 Operating Instructions Manual

E Connecting to a TV and an AV receiver equipped with a DTS decoder

Rear of the unit
to an AC outlet
Front speaker (L)
Surround speaker (L)
Set the setup menu correctly after
connecting
Set the "TV Aspect" and "Digital Audio Output" in the setup
menu according to the TV and audio equipment connected
to the unit as follows:
(See "Changing Setup Values" on page 46 for details.)
TV Aspect
When the TV has a conventional 4:3 screen:
4:3 Letterbox or 4:3 Panscan
When the TV has a wide 16:9 screen:
16:9 Wide
Digital Audio Output
Stream/PCM
to the video input jack (yellow)
Video cord (supplied)
yellow
to VIDEO OUT jack (yellow)
VIDEO OUT
OPTICAL
DIGITAL OUT
AUDIO
OUT1
to DIGITAL OUT
OPTICAL jack
Optical cord (not supplied)
to the digital input jack
Center speaker Subwoofer
yellow
COMPONENT/
PROGRESSIVE SCAN
Y
S-VIDEO
S-VIDEO VIDEO
OUT OUT
L
L P /C
R R
R
R P /C
B B COAXIAL
COMPONENT
AUDIO DIGITAL
VIDEO OUT/
OUT2 OUT
PROGRESSIVE
SCAN
to DIGITAL OUT
COAXIAL jack
Coaxial cord (not supplied)
Receiver equipped
with a DTS decoder
Surround speaker (R)
CAUTION
DO NOT select "Stream/PCM" for the "Digital Audio
Output" in the setup menu when connecting to an AV
receiver not equipped with a DTS decoder (with an optical
or coaxial connecting cord).
Merely attempting to play a disc may cause a screeching
noise which could be harmful to your ears and damage
the speakers. In this case, be sure to select "PCM" for the
"Digital Audio Output".
CONTINUE
TV
Front speaker (R)
21
ENGLISH
En