Download Print this page

ochain E active spider User Manual

Advertisement

Quick Links

OCHAIN | E active spider user manual
Warranty, installation and maintenance

Advertisement

loading
Need help?

Need help?

Do you have a question about the E active spider and is the answer not in the manual?

Questions and answers

Summary of Contents for ochain E active spider

  • Page 1 OCHAIN | E active spider user manual Warranty, installation and maintenance...
  • Page 2: Limited Warranty And Disclaimer

    Warranty not cover wear and tear on consumables, available as regular spare parts. If Ochain srl, aJer checking the product, finds that the damage is due to one of the reasons men*oned above, the warranty request will not be accepted and the defec*ve item is sent back to the plain*ff...
  • Page 3: Safety Warnings

    If you have any ques*ons, please contact a professional bike mechanic or ask Ochain for support at support@ochain.bike Ochain srl company informa0on Ochain srl ·Via Romagnosi 12 ·...
  • Page 4: Maintenance

    TIGHTENING, INCORRECT TIGHTENING MAY CAUSE MALFUNCTIONING OR BREAKAGE. Elastomers play an important role in OCHAIN and they need to be replaced every 75 hours of use on your MTB, in order to preserve the product and to keep the higher standards of performance.
  • Page 5 Chainline is the distance between the centerline of your frame and the average centerline of your chainring. To choose your OCHAIN·E in place of your original chainring maintaining the chainline as aligned as possible, you have to refer to the following link on our website: hLps://www.ochain.bike/pages/discover-ochain-e...
  • Page 6 OCHAIN·E formally replaces the original direct mount e-MTB chainring. OCHAIN·E is compa*ble with chainring from 32T. Nethertheless, Ochain srl cannot guarantee compa*bility with every single frame and with every single crankset on the market. **Bolt Circle Diameter or BCD is the diameter of the circle that goes through the center of the bolts...
  • Page 7 Tighten with a wrench FULLY ENGAGED in the bolt, use Loc*te medium on bolts thread to prevent loosening. Tighten all four chainring bolts to chainring nuts with 7Nm torque. NOTE: If you don’t want to use the Ochain chainring, you have to find the correct nut’s length that fits correctly your chainring.