Understanding Status Messages - Motorola PHOTON 4G User Manual

Accessing Your Email and Data Services
on GSM/UMTS Networks
To access your email and browse the Web when
travelling, you may need to manually select the carrier
that provides Sprint service in your location. You can
find a list of carriers for each country where GSM data
service is offered at
www.sprint.com/sww
the instructions below to select the appropriate carrier
network on your phone.
To select a GSM data service carrier for a specific country:
1.
Touch
>
Mobile networks.
2. Under
Network mode
3.
Under
GSM/UMTS settings
and select a wireless network that supports Sprint
International GSM Data Roaming. If applicable,
touch
Operator selection
operator.
Note:
Be sure you have the
116 3E. Sprint Worldwide Wireless Service
. Then, follow
Settings > Wireless & networks >
, select
Any GSM/UMTS
, touch
Select network
and select a specific
Allow GSM Data option checked.
Accessing Your Email and Data Services
on CDMA Networks
If data service is available on a CDMA network, then
you only need to set the phone to CDMA; you will not
need to select the specific carrier. Selecting a specific
carrier is only necessary for providers on the GSM
network. If your device has automatically selected a
GSM network while travelling, then you will need to set
the phone to CDMA to access CDMA data services.
(See "Activating Global Roaming Mode" on page 112.)
Visit
www.sprint.com/sww
in each country.

Understanding Status Messages

.
You may receive status messages under certain
conditions. Before contacting Sprint Worldwide
Customer Support, note the message, numeric code,
and the conditions under which it appeared. The
following table lists and describes the status messages.
for a list of services available