Connecting Your Phone To Your Computer - Motorola PHOTON 4G User Manual

Connecting Your Phone to Your
Computer
You can connect your phone to a computer with a USB
cable.
Note: The first time you use a USB connection, your
computer may indicate that drivers are being installed.
Follow any prompts you see to complete the
installation. This may take a few minutes.
1.
With a memory card inserted, and your phone
showing the home screen, connect a Motorola
micro USB data cable from your phone's micro
USB port to a USB port on your computer. Your
phone should show
Note:
Make sure to connect the phone to a high power USB
port. Typically, these are located directly on your
computer.
2. On your phone, flick down the status bar to see the
USB connection options.
in the status bar.
3. Touch an option and then touch
Motorola Phone Portal
computer with a cable or a Wi-Fi network to share
files through an easy-to-use home screen.
®
Windows Media Sync
your computer and phone.
Note: This device can be administered through Microsoft
Exchange server security policies. Additional security
policies may be applied to your device depending on
rules set by your company.
: Drag and drop files between
USB Mass Storage
your computer and memory card folders. When
you're done, use "Safely Remove Hardware"
before disconnecting the USB cable.
Note:
You can't use the files on your memory card with your
phone while it is connected to the computer.
: Use the connection only to charge a
Charge Only
device.
2F. microSD Card and File Transfer
.
OK
: Connect your phone and
: Share media files between
55