Pairing Your Headset - Motorola MOTOPURE H12 Manual

English

Pairing your headset

Your phone's Bluetooth feature is off by default. To use your headset, you
must turn on the Bluetooth feature in your phone. Please check your phone's
user's guide.
Note: The Bluetooth feature remains on until you turn the feature off.
Before you can use your headset, you must pair it with your phone.
1. Ensure headset is in pairing mode
Remove headset from charging base or desktop charger and power it on.
The indicator light fl ashes to initiate easy pairing. After a few moments,
the indicator light will be steadily lit in blue to indicate headset is in
pairing mode.
If the headset does not enter into pairing mode, see "Troubleshooting"
section.
2. Set your phone to look for your headset
• Perform a device discovery from the phone. For details about device
discovery, consult your phone's user's guide. The phone lists Bluetooth
devices it fi nds.
• Select Motorola H12 in the list of discovered devices and confi rm by
following the on-screen prompts.
• When prompted by the phone, enter the passkey 0000 and confi rm.
Pairing is successful when the headset indicator changes from steadily lit
to fl ashing blue.
Test and use
Your phone and headset are now paired and ready to make and receive
calls. To confi rm they are successfully paired and operating properly, place
the headset over your ear and make a call from your phone. You will hear
ringing from the headset. After you have successfully paired your phone
and headset, you do not need to repeat these steps each time you use the
headset.
10