1. Manuals
  2. Brands
  3. red lighting Manuals
  4. Lighting Equipment
  5. CLASSE LW 60
  6. User manual

red lighting CLASSE LW 60 User Manual

Professional moving head
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CLASSE LW 60 and is the answer not in the manual?

Questions and answers

Related Manuals for red lighting CLASSE LW 60

Summary of Contents for red lighting CLASSE LW 60

  • Page 2 ·Preset program: 7 built in programs can be called up via DMX controller ·Wireless receiver pre-installed: No time-consuming on signal cable connection and trouble shooting on defective cables, no signal declination from cable connections ·Software-upload by optional accessory via DMX line - 1 - Classe LW 60 v1.0...

  • Page 3: Fixture Overview

    (13) 3-PIN DMX output socket (14) 3-PIN DMX input socket (15) 5-PIN DMX output socket (16) 5-PIN DMX input socket (17) Power supply (18) Power switch (19) Fuse 3. SAFETY INSTRUCTIONS 3.1) Important safety warns - 2 - Classe LW 60 v1.0...

  • Page 4: General Guidelines

    This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last page of this manual. - 3 - Classe LW 60 v1.0...

  • Page 5: Installation Instructions

    These installations have to be approved by a skilled person once a year. Overhead mounting requires extensive experience, including amongst others calculating working load limits, installation material being used, and periodic safety inspection of all - 4 - Classe LW 60 v1.0...
  • Page 6 Insert the end in the carabine and tighten the safety screw. Notice: this step is quite important to ensure that the fixture will not drop out by the damage of the clamp. - 5 - Classe LW 60 v1.0...

  • Page 7: Dimensional Drawings

    If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury. - 6 - Classe LW 60 v1.0...

  • Page 8: Dmx-512 Control Connection

    This digital starting address is the channel number from which the fixture starts to “listen” to the digital control information sent out from the DMX controller. The allocation of this starting address is achieved by setting the correct - 7 - Classe LW 60 v1.0...

  • Page 9: Operting Instructions Of The Internal Dmx Wireless System

    Can remove the fixture from the connection with the transmitter, the fixture become free and ready to log in any transmitter. 4. Setup the wireless system: 1) Connect the transmitter with the DMX controller - 8 - Classe LW 60 v1.0...

  • Page 10: Control Board

    Set Dmx Address A001~AXXX DMX address setting Value Display PAN…… DMX value display Set To Slave Slave1,Slave2,Slave3 Slave setting Auto Program Master / Alone Auto program Music Control Master / Alone Music control - 9 - Classe LW 60 v1.0...
  • Page 11 Calbrate and adjust the effects PAN=XXX standard/right position Password “050” User Mode XXXXXX(Band) User’s mode to change channel User Mode A numbers User Mode B User Mode C Edit User Mode PAN = CH01 Preset User modes - 10 - Classe LW 60 v1.0...
  • Page 12 “Select program”. You can set the number of steps under “Edit program”. You can edit the individual scenes under “Edit scenes”. With this function, you can run the individual scenes either automatically, i.e. with the adjusted Step-Time. - 11 - Classe LW 60 v1.0...
  • Page 13 Last Run Hours With this function, you can display last the running time of the lamp. The display shows “XXXX”, “XXXX” stands for the number of hours 1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until - 12 - Classe LW 60 v1.0...
  • Page 14 5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu. 9.2.3 Software version With this function, you can display the software version of the device. 1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until - 13 - Classe LW 60 v1.0...
  • Page 15 4．The display show “OFF”,Press <Up/Down>, the display will show “ON”. 5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu. Tilt Reverse With this function you can reverse the Tilt-movement. 1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until - 14 - Classe LW 60 v1.0...
  • Page 16 “Personality”is displayed. Press ENTER, the display will show “Personality”. Tap the <Up/Down>button until the display will show “Status setting”. Press ENTER, the display will show “Status setting”. 2．Press <Up/Down>, the display will show “Movement Speed”. - 15 - Classe LW 60 v1.0...
  • Page 17 1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until “Personality”is displayed. Press ENTER, the display will show “Personality”. 2．Press <Up/Down>, the display will show “Fans Control”. 3．Press< ENTER>, the display will show “Fans Control”. - 16 - Classe LW 60 v1.0...
  • Page 18 With the function “rest”, you can log out the projector from the wireless sender. 6．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until “Personality”is displayed. Press ENTER, the display will show “Personality”. 7．Press <Up/Down>, the display will show “Wireless DMX”. - 17 - Classe LW 60 v1.0...
  • Page 19 2．Press <Up/Down>, the display will show “Manual control”. 3．Press< ENTER>, the display will show “Manual control”. 4．The display show “PAN=XXX”. 5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu. - 18 - Classe LW 60 v1.0...
  • Page 20 DMX-controller to the moving head. Adjust the desired scene numbers via the encoder (from – to). When you call up the scenes at your controller, they will automatically be transmitted to the moving head. - 19 - Classe LW 60 v1.0...
  • Page 21 4. Program selection for Edit Program • Select “Edit program” by turning the encoder. • Press the Enter button to confirm. • Select “Edit program” by turning the encoder. • Press the Enter button to confirm. - 20 - Classe LW 60 v1.0...
  • Page 22 Auto Pro Part 1 is Program 2; Auto Pro Part 2 is Program 3; Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments, as shown in the following picture: - 21 - Classe LW 60 v1.0...

  • Page 23: Instructions On Use

    8-39 Rainbow colours 40-71 Rainbow colours 72-103 Rainbow colours 104-135 Rainbow colours 136-167 Rainbow colours 168-199 Rainbow colours 200-231 Rainbow colours 232-255 Crossfading colours from slow to fast Lamp on/off, reset, internal programs: - 22 - Classe LW 60 v1.0...
  • Page 24 (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the main PCB). The TILT- movement is not located in the default position after the reset. - 23 - Classe LW 60 v1.0...

  • Page 25: Cleaning And Maintenance

    Flight case dimensions: 86x56x72cm Net weight :9KGS Gross weight:11.5KGS（carton packing） 77.5 KGS (flight case packing/4PCS) Remark: errors and omissions for every information given in this manual excepted. All information is subject to change without prior notice. - 24 - Classe LW 60 v1.0...

Table of Contents