Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HOTA F6+
Summary of Contents for HOTA F6+
- Page 1 F6+ 4-Channel AC/DC Quad-Channel Smart Charger...
- Page 2 F6 4-Channel DC Smart Charger Thank you for purchasing the HOTA series of smart c h a rg e r s . P l e a s e re a d t h i s I n s t r u c t i o n s c a re f u l l y before use so as to use the product better .
-
Page 3: Table Of Contents
Contents Product Overview 1、Specifications 2、Introduction 3、Warnings and Safety Notes 4、Recommended Way of Connection 5、Balance port connection and Notes 6、Mutli-Function port 7、Standard battery types and task parameters Operation and setup 1、How to confirm the Charging Current 2、Operative Skills 3、Display of the working status 4、Charger Settings 5、Charger Settings >Task Parameters 6、Charger Settings >System Parameters... - Page 4 F6 4-Channel DC Smart Charger Product Overview Multiple Outputs , High Performance A 4-Channel DC charging system that can handle tasks under any circumstance. A powerful function of combined charging F6 can concentrate the output power of two channels on one battery, making the combined charging power up to 500W and combined charging current up to 22A .
-
Page 5: Product Overview
Product Overview Specifications Input Voltage DC 10.5~30V Balance Current 1000mA x 4 Charge Current 0.1~15A x 4 Discharge Current 0.1~3A x 4 Combined Charge Power 250W x 4 @ Input Voltage > 23V 500W x 2 @Input vol t age>>23V charge power Storage Regenerative... - Page 6 Product Overview An introduction Balance Port for Channel 2 Battery Port for Channel 2 Battery Port for Channel 1 AC Port Balance Port DC Port for Channel 1 Touch Key Multi-Function Port USB Port 5V Update Port 1 Update Port 2 Balance Port for Channel 4 Battery Port...
-
Page 7: 3、Warnings And Safety Notes 0
Product Overview Warnings and Safety Notes 1. Do not use the charger in an unattended manner, in case of any functional abnormality,please stop using it and refer to the manual. 2. Keep the charger away from dust, humidity, rain and high temperature, as well as direct expo sure to sunlight and intense vibration. -
Page 8: 5、Balance Port Connection And Notes 0
Product Overview Balance Port Connection and Notes 1. The detection balance port of this product is suitable for lithium battery packs; 2. When the battery is connected, it is aligned with the " - " sign . The diagram above shows the alignment of the balance plug;... - Page 9 Product Overview Multi-Function Port 1. Connect to the RC airplane control servo 2. Connect to the RC airplane receiver or RF transmitter RC airplane control servo connects to the RC airplane receiver or RF transmitter Multi-function port connects to the Multi-function port F6+ 4-Channel DC Smart Charger...
-
Page 10: 7、Standard Battery Types And Task Parameters 0
Product Overview Standard Battery Types and Task Parameters Battery Type NiCd Smart LiFe Lilon LiPo LiHV NiZn Lixx Eneloop NiMH Ba�ery Task Parameters Rate d 1.20V 3.20V 3.6V 3.70V 3.80V 1.50V 3.7V 3.70V 2.00V 1.20V Vo l t ag e Full Charge 1.50V 3.65V... -
Page 11: Operation And Setup
Operation and Setup How to conform the charging current It is important to know the maximum charging current of the battery before charging as excessive current could influence the life span of battery ,even cause damages. In addi- tion, excessive current can cause heating even explosion of the battery during the charging process. - Page 12 Operation and Setup Working parameters Display Task status Task status LiPo-�sCHG Current Standby Battery channel parameters 22.95 Electric current Electric current of current task of current task Output voltage Output voltage 24.2V 23.1V/45W /power /power LiPo-�sCHG Battery Current Standby parameters channel 22.99 Electric current...
- Page 13 Operation and Setup Working parameters Display Current Device Name channel Operation Name 00:00:00 Time Task status Standby O u t p u t Output Current Power 22.84 C a p a c i t y Total Battery charged Voltage 3.838V 3.836V 3.829V Cell Voltage...
- Page 14 Operation and Setup Working parameters Display Current Battery parameters and channel Percentage of completion Operation LiPo-6S(4.20V) 43% 00:00:01 Time Task Status Charging O u t p u t Output Current Power 22.83 C a p a c i t y Total Battery charged Voltage...
- Page 15 Operation and Setup Working parameters Display Current Battery parameters and channel Percentage of completion Operation LiPo-6S(4.20V) 100% 00:09:00 Time Task Status Fast Charging Completed Status O u t p u t Output Current Power 25.22 C a p a c i t y Total Battery charged Voltage...
- Page 16 Operation and Setup Working parameters Display Current Battery parameters and channel Percentage of completion Operation LiPo-6S(3.60V) 36% 00:00:40 Time Task Status Discharging O u t p u t Output -0.3 Current Power 22.85 C a p a c i t y Total Battery charged Voltage...
- Page 17 Operation and Setup Working parameters Display Current Battery parameters and channel Percentage of completion Operation Pb-12S(1.90V) 00:00:45 Time Task Status External Discharging O u t p u t Output -9.1 Current Power -111 26.79 C a p a c i t y Total Battery charged Voltage...
- Page 18 Operation and Setup Working parameters Display Current Battery parameters and channel Percentage of completion Operation LiPo-6S(3.80V) 00:00:19 Time Task Status Storage Charging O u t p u t Output Current Power 22.70 C a p a c i t y Total Battery charged Voltage...
- Page 19 Operation and Setup Working parameters Display Current Battery parameters and channel Percentage of completion Operation LiPo-6S(3.80V) 40% 00:00:22 Time Task Status Balancing O u t p u t Output Current Power 22.70 C a p a c i t y Total Battery charged Voltage...
- Page 20 Operation and Setup Working parameters Display Current Battery parameters and channel Percentage of completion Operation LiPo-6S(3.60V) 56% 00:00:06 Time Task Status Regenerative Discharge O u t p u t Output -3.1 Current Power 23.46 C a p a c i t y Total Battery charged Voltage...
- Page 21 Operation and Setup Working parameters Display Current Battery parameters and channel Percentage of completion LiPo-6S(4.20V) 55% 00:00:52 Operation Time Combined Charging Task Status 21.2 O u t p u t Output Current Power 23.33 C a p a c i t y Total Bat- charged tery Voltage...
-
Page 22: 4、Charger Settings 1
Operation and Setup Charger Settings Charger Settings Task Parameters System Parameters Tools CH1 Calibrations CH2 Calibrations CH3 Calibrations CH4 Calibrations System Self-Checking Factory Settings System Info Back In the alternate interface, long press the speed shuttle key to bring up the "charger settings"... -
Page 23: 5、Charger Settings >Task Parameters 1
Operation and Setup Charger Settings > Task Parameters < Task Parameters Safety Timer 2400minutes 999999mAh Max. Capacity End Current Trickle Charge Back In the standby interface, Long press the speed shuttle key to pop up the “Charger Settings”Menu , then choose "Task parameters” ; the menu items are as follows: Allow maximum running time;... -
Page 24: 6、Charger Settings >System Parameters 2
Operation and Setup Charger Settings > System Parameters < System Settings Language English Regenerative Discharge 1200W Max. Input Power 10.5V Min.Input Voltage High LCD Backlight High Volume Repeat Completion Signal Name Device Name Average AC Power Night mode Continous mode Back In the standby interface, long press the speed shuttle key to pop up the “Charger Settings"... -
Page 25: 7、Charger Settings > Tools 2
Operation and Setup Charger Settings > Tools < Tools PWM Measurement Servo Manual Test Servo Automatic Test PPM Out Back In the standby interface, long press the speed shuttle key to pop up the "Charger Settings" menu,then choose the item “Tools” ; menu items are as follows: PWM Measurement Test parameters : PWM signal frequency ,duty cycle and pulse width Regulate the parameters of the output signal, cycle and pulse widthof the... -
Page 26: 8、Task Settings 2
Operation and Setup Task Settings Task Settings Select Task Charging LiPo Battery Type Cell Voltage 4.20V Cell Count 6S(22.2V) 1.0A Current Settings Start Task Back Connect power supply to the charger, wait for the system to complete its Self-checking. In standby interface , connect the battery to the charger , then after selecting the corresponding channel , short press the speed shuttle key to pop up the "Task Setting"... -
Page 27: 9、Task Settings And Notes 2
Operation and Setup Task Settings and Notes The F6+ smart charger operates in a series charging mode. When connecting to the battery, the battery output cable must be connected. For lithium batteries, it is strongly recommended to connect the balance ports for balanced charging so as to ensure that the charger can accurately monitor the voltage of each cell and balance the cells having poor consistency. - Page 28 Operation and Setup Task Settings and Notes External Discharge Functions The external discharge function uses an external high-power load resistor to quickly discharge the battery in an accurate way. When using it, the battery to be discharged needs to be connected to the input port, and the output is connected to the resister load. It is recommended that the resistance of the load be between 1.5 and 2.5 ohms.
- Page 29 Operation and Setup Task Settings and Notes Regenerative Discharge Function The F6+ smart charger has a regenerative discharge power up to a capacity of 250W x 4 ,which can take the battery power of the output ends back to input end's battery in the balance way . There is no need to connect to or turn on the power during operation,just directlyconnect the battery ,which going to receive power, to the charger's input port, and wait forthe system self...
- Page 30 Operation and Setup Task Settings and Notes Combined charging Function When the combined charging is in progress, the screen is marked in orange. After the com- bined charging is completed, the screen will change to green or blue. When the combined charging is completed and the battery cell voltage difference is less than 20mV, the screen will change to green .
-
Page 31: Product Qualification Declaration
Product Qualification Declaration F6+ Smart Charger confirms to the relevant commands in Chapter 15B :2017 of the FCC Testing Standards Result EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 EN 62311:2008 ETSI EN 301 489-1 V2.2.0(2017-03) ETSI EN 301 489-3 V2.1.1(2017-03) ETSI EN 303 417 V1.1.1(2017-09) F6+ 4-Channel DC Smart Charger... -
Page 32: Troubleshooting
Troubleshooting Error handling during “System self—checking “ : when the charger is performing the System self—checking and if the output port is connected to the battery, it will cause a self-checking error ; at that time, the battery should be removed and wait for 5 seconds before retest. Do not insert or detach battery from the DC port during the System self-checking. -
Page 33: Safety Tips
The products described in this Instructions, including software, product features, appearance, Ul design, etc., have property rights protection, any individuals or organi- zations must not copy or plagiarize. Once discovered, HOTA will pursue its legal rights. F6+ 4-Channel DC Smart Charger... -
Page 34: Safety Notes
Safety Notes Before using the charger for the first time, please read the details in the "Safety Notes“. Make sure you use this charger safely and correctly. WARNING! FIRE HAZARD! NEVER USE CHARGER UNSUPERVISED! Please read the complete Instructions carefully before using the charger; Make sure that the charger is kept away from heat and humid environment during use, pay attention to ventilation and heat dissipation, pit it away from flammable materials;... - Page 35 Add: Website: www.hota-exp.com 213/215 , Floor 2, Building 6, Monli Industrial Park, You Song Road., Longhua District, Shenzhen, China Tel: 0755-28180135 E-mail: info@hota-exp.com...
Need help?
Do you have a question about the F6+ and is the answer not in the manual?
Questions and answers