Motorola M3188 Manual page 54

mod2_en.bk : opt_menu.fm5 Page 52 Wednesday, January 13, 1999 12:57 PM
Phone
MENU
Book
j New Security Code
The security code is used to control access to security and other
options within the menus.
This option is used to change the security code, which is set at
manufacture to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new, six digit code to replace
the old security code.
AIn order to safeguard your phone, you should change your
security code from the factory setting as soon as possible.
j Extended Menus
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings, On or Off.
English
52 Using the Options Menu
Phone
Call Related
Messages
Setup
Features
j Language Selection
Change Greeting
Battery Saving Mode
j Select Keypad Tones
Accessory
Network Call
Setup
Selection Meters
This option is used to change the language for display messages.
The option has multiple settings.
When you select a language, all further display prompts and help
messages will be in the selected language.
Changes the message displayed when you switch on your phone.
May not be available if pre-programmed by your Service Provider.
This option can help you to conserve battery power. Also known
as DTX (Discontinuous Transmission), this feature will cause your
phone to operate at reduced power when you are not talking.
The option has two settings, On or Off.
This option allows you to change or disable tones you hear when
you press a key.
The option has three settings, Normal Tones, Single Tone
or No Tones.