Ring Or Vibrate; Select Phone Line - Motorola L7089 Manual

leap_en.bk : opt_menu.fm5 Page 64 Wednesday, February 24, 1999 4:21 PM

Select Phone Line

i Press E. Select the Quick Access feature (d Switch Line
1/2?) or after the tone, say the Voice Tag name. See 'Voice
Control for Quick Access Features'.
This option allows you to switch between Line 1 and Line 2.
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
AThis feature is not available when you are using the
GSM 900 band.
Adjust Ring Volume
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the side of
your phone.
i Press E followed by the volume button to either
increase or decrease the ringer volume.
English 64
Using the Options Menu
j Ring or Vibrate
i Press E. Select the Quick Access feature (L Vibrate
On/Off?) or after the tone, say the Voice Tag name. See
'Voice Control for Quick Access Features'.
This option sets the way your phone alerts you to an incoming
call. The options are:
• Ring Only - the phone will ring with the tone specified by
the Set Ringer Tone option.
• Vibrate Only - the phone will vibrate using VibraCall™.
• Vibrate Then Ring - the phone will vibrate twice and then
ring.
• No Ring or Vibrate - the phone will just display the Call
message.
AThe setting you choose also defines the type of alert for an
incoming SMS message (except that if you select Vibrate
Then Ring, your phone will just vibrate).
j Set Ringer Tone
This option sets the tone your phone will make when an
incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Single Ring Tone - Music Tone
When selected, your phone will produce one of these alternative
ringer tones.