Table of Contents
Advertisement
leap_en.bk : abtphone.fm5 Page 15 Wednesday, February 24, 1999 4:21 PM
Earpiece Connector
The earpiece connector is on the left-hand side of your phone,
above the volume button. Use this connector for the headset
accessories available from your Motorola stockist.
Communicating with External Devices
To communicate with an external device, such as a personal
computer or a fax machine, your phone includes the following
features:
• an infra-red lens located next to the antenna on the top of the
phone.
• an RS-232 serial data port located at the bottom of the phone.
Setting up the Infra-Red Feature
i Press E. Select the Quick Access feature (« Activate
IR?) or after the tone, say the Voice Tag name. See 'Voice
Control for Quick Access Features'.
Before you can transfer your data:
• Align the infra-red lens on your phone with the infra-red lens
on the external device.
• Make sure that the infra-red feature is active in both the
phone and the external device.
The phone and the external device can be up to 30 cm apart.
For operating details, see 'Activate IR Port' in the 'Phone Setup'
section of this manual.
Setting up the RS-232 Serial Data Port
The RS-232 serial data port requires a Motorola 3-pin
RS-232 serial data cable. This is available from your Motorola
stockist.
To connect the cable to your external device, please refer to the
manufacturer's documentation.
Looking After Your Phone
• Never leave your phone or battery in extreme temperatures
(over 60°C), for example behind glass in very hot, direct
sunlight.
• To clean your phone, use a moistened or antistatic cloth. Do
not use a dry or electrostatically charged cloth.
The Status Indicator
The status indicator on the top of the phone
provides you with the following information:
Incoming Call
Alternate Red/Green
In Service
Flashing Green
No Service
Flashing Red
Roaming
Flashing Yellow
About Your Phone, Battery and SIM Card
15
English
Advertisement
Table of Contents
