Before Doubting About Troubles (Dvd); Before Doubting About Troubles (Vcr) - Daewoo DV6T534B Owner's Manual

Before doubting about troubles (VCR)

Symptom
¥ ÒPower OnÓ does not work. Please check whether a power plug is inserted in an electric outlet.
¥ It does not work even in ÒPower OnÓ. Please check whether a videotape is inserted in.
Try to insert a plug again.
¥ A videotape is not inputted in. Please check whether a power plug is inserted in an electric outlet.
Please check whether a videotape is in.
Please check whether a videotape is inserted in a right direction (a
side of transparent window should be on the upside)
Have you inputted a videotape again just after the tape was ejected?
Please try it again after fully ejecting it.
When a videotape forces to be ejected, the tape may not be inputted.
In the case, please pull out an outlet, and then push the tape
smoothly.
¥ On inputting a videotape, the tape is ThatÕs why a safe mode to protect a videotape is operated
re-ejected. automatically. Please pull out the tape and input it again.
¥ A videotape is not ejected. In case the product is used for a long time, a videotape may not be ejected
for a film inside may be stretched. In the case, please pull out a power plug
for about 10mins and then press [EJECT] button.
¥ A channel on video and a play screen Please check your antennaÕs connection.
does not appear. TV channel should be fixed on video channel (3 or 4).
Please check your antennaÕs signal whether it may be weak. In case of
its weakness, please use a frequency amplifier connected with the
device.
Press [TV/VCR] and then let ÒVCRÓ is displayed on the display panel.
¥ Noise (screen noise) appears on While in no use of VCR, was it turned on?
screen. While in recording a program, do you watch another channel?
Select TV by pressing [TV/VCR] button on remote control.
¥ Noise appears on screen after While in playing a videotape, there may happen some noise or blot in
recording. the part of the beginning of a videotape or resuming ÒPAUSEÓ, which
are not breakdown.
¥ While in playing, noise appears. Please press [TRACKING] for better screen. Videotape may be poor.
Try to change it to another one.
¥ Sound and screen are irregular. Please use a head-cleaner to clean VCR heads. VCR heads may be
¥ Sound comes out but screen does not contaminated.
appear.
¥ Screen is irregular and stripes appears.
¥ "Screen Error" message is displayed in
a screen.
¥ While recording and playing, the top Since VCR Play signals are not stable like a TV signals, screen may be
of screen extremely waves. unstable or curved while in playing. To fix the problem, please
horizontal adjustment.
¥ A screen is not clear. In case videotape is the one recorded by other products or old one,
stripe may appear on the screen.
Try to adjust the screen by [TRACKING+/Ð] button.
Try to use a head-cleaner.
¥ A screen at pause is trembling or slow Try to use a head-cleaner.
screen is not clear. Try to adjust the screen by [TRACKING+/Ð] button.
46
Checks
Symptom
¥ Recording a TV program is impossible. Please check whether a channel is fixed on video. If not, you have to
turn it into ÒTVÓ by pressing [OUTPUT] button.
Please check whether the timer recording info is right.
Are RF cables inputted antenna connection terminal correctly?
Does a CH number selected in display section appear?
Please check a tab on a tape whether it is broken or not. (If it was
broken, please scotch-tape it)
Check whether the screen is displayed in VCR Only Channel. Press
[OUTPUT] button in this remote controller to adjust in "General
Broadcast" condition.
Is the rounded line (RF cable) connected in "ANT.IN" terminal?
¥ Once pressing [REC], a videotape is Please check whether the clock is right.
ejected automatically. Does the display on your video show Ò
Please make it out.
Please check whether the timer recording info is right.
Please check a tab on a tape whether it is broke or not. (If it was
broken, please scotch-tape it)
¥ Timer recording of Cable TV does not Was a cable data output code connected correctly?
work. Were a converter manufacturer setup and output channel right?
Did you enter a password? (Please cancel it.)
Did you turn off your player? (Please turn it on.)
¥ In spite of pressing [CHANNEL], a You may not memorize channels.
channel can not be set. Please check your channel setting or press a number button.
¥ While duplicating, screen is not clean Some tapes or discs distributed in the market for lending is set to
and distorted. prevent copy in manufacturing. These tapes cannot be duplicated in
a good condition.
¥ remote control does not work. Battery may be weak or exhausted.
A receiver of remote control may be different with a sender.
¥ Buttons on remote control do not In case a videotape is positioned in the beginning, ÒVISS REWÓ and
work. ÒREWÓ do not work.
In case a videotape is positioned in the end, ÒFFÓ, ÒVISS FFÓ, ÒPLAYÓ
and ÒRECÓ do not work.
Please check whether another button is pressed.
¥ VISS index search does not work. Are you playing a tape that is not recorded in this recorder? (Try to
record it with the recorder.)
You may start recording it in ÒREC-PAUSEÓ. Please start recording it
from stop condition.
¥ Cable broadcasting can not be Please select ÒCABLEÓ not ÒNETWORKÓ from the ÒCHANNEL SETTINGÓ.
selected.
Before doubting about troubles (VCR)
Checks
Ó (Ready to timer recording)?
47