Do you have a question about the SX-PC26P and is the answer not in the manual?
Questions and answers
Rene
May 30, 2025
I am not able to access volume switch
1 comments:
Mr. Anderson
May 30, 2025
To fix the volume switch issue on the Technics SX-PC26P:
1. Use the sliding MAIN VOLUME control to set the volume to an appropriate level. 2. Check the MIDI LOCAL CONTROL setting. If it is set to "off," set it to "on." 3. If sound is distorted or quavers, check MIDI or COMPUTER terminal connections. Disconnect or adjust software settings to avoid duplicate sound signals. 4. Ensure the volume-related component (VR1: QRV09A01B14 V.R. VOLUME) is functioning properly. If faulty, consider replacing it.
Make sure the instrument is powered off before adjusting internal components.
SPECIFICATIONS SPECIFICATIONS KEYBOARD 88 KEYS (WITH TOUCH RESPONSE) SOUND GENERATOR MAX. POLYPHONY 32 NOTES (16 STEREO NOTES) SOUND GRAND, UPRIGHT, E PIANO, HARPSI, STRINGS, PIPE ORGAN PEDAL SOFT, SUSTAIN DIGITAL REVERB FUNCTIONS VOLUME, DEMO, TUNING, TRANSPOSE, TOUCH SENSITIVITY, REVERB, BASIC CHANNEL, LOCAL CONTROL TERMINALS PHONES ×...
Page 3
1. Simplified Guide This manual mentions the revisions of original Service Manual SX-P25. - Schematic Diagram(MAIN, ACP,PKB)circuit - Printed Circuit Board Diagram(MAIN, ACP,PKB)P.C.B. - Wiring Connection Diagram - Replacement Parts List - Cabinet Parts Location - Manual Keyboard Parts Location - Packaging The other items are refered to original Service Manual.
Page 4
Ref. No. Part No. Part Name & Description Remarks QGKG0159AA ORNAMENT QMFG1276AA FELT QMFG1093AA FELT XTT4+10AFZ SCREW K2AA2G000003 AC INLET COVER EXCEPT P PC SJS9334A AC IN SOKET (P PC) QQLG147AA HEADPHONE LABEL QLZG021A CORE (P PC) QMFG1269AA FELT QKSGG022AA KEYBOARD COVER GUIDE(L) QKSGG023AA KEYBOARD COVER GUIDE(R)
Page 5
Ref. No. Part No. Part Name & Description Remarks XYN4+F16FZ SCREW XYN4+F16 SCREW XTW3+10TFZ SCREW XYA35+JA12 SCREW (P PC) XYA35+JA12 SCREW EXCEPT P PC XYN6+F16FZ SCREW XTT4+16A SCREW QHWG007AA SCREW QHDG067AA SCREW QHDG021AA SCREW XTT4+20AFZ SCREW XTN4+16F SCREW QHDG016AB SCREW WITH WASHER QHDG032AB SCREW XTB35+16A...
Page 6
Ref. No. Part No. Part Name & Description Remarks QMFG1266BA FELT QMFG1265AA FELT QJAG025AA AC CORD K2CB2ED00001 (P PC) QJAG027AA AC CORD (EX EG EQ GU GT GM) QJAG028AA AC CORD (EB) QJAG029AA AC CORD (GN) QQFGPC26AA FAN BAG (P)<IA> QQFGPC26BA FAN BAG (PC EX EQ EB EG)<IB>...
Page 7
Ref. No. Part No. Part Name & Description Remarks ECUV1H101JG 50V 100P MAIN C40-46 ECUV1H104ZFX 50V 0.1U MAIN ECEA1HKN010 50V 1U MAIN ECEA1HKN010 50V 1U MAIN C51-56 ECUV1H104ZFX 50V 0.1U MAIN ECEA0JKA470 6.3V 47U MAIN C58,59 ECUV1H101JG 50V 100P MAIN ECUV1H104ZFX 50V 0.1U MAIN...
Page 8
Ref. No. Part No. Part Name & Description Remarks QEUGQ8H08BCZ CONNECTOR(8P) MKB2 QJUG01408AA CONNECTOR(8P) MKB1 LN282RPXVTX3 LNJ282RKRX02 SW MA111TX DIODE MA2J11100L MAIN MA165 DIODE MA2C165 MKB1 SEL4214RLC05 HPVOL ERA1502V5 DIODE B0EAKM000061 MAIN MA165 DIODE MA2C165 MKB1 ERA1502V5 DIODE B0EAKM000061 MAIN D3,D4 MA165 DIODE...
Page 9
Ref. No. Part No. Part Name & Description Remarks M5218AL C0AABB000054 MAIN M5256DFP10VL C3BBFC000237 MAIN IC6,C7 M5218AFPE3 C0ABBB000163 MAIN AN7194K-LD MAIN PCM1734EB MAIN IC10 QSIGX3C32003 MAIN IC13 M5F7805L C0CAADG00031 MAIN QJJG008AA JACK AUX IN R/L K2HA206B0002 MAIN SJJG100A JACK HEADPHONE K2HB103J0056 HPVOL QJSG007AA JACK PEDAL IN...
Page 10
Ref. No. Part No. Part Name & Description Remarks ERG1SJ100E HPVOL ERJ6GEYJ101V 1/10W 100 MAIN ERG1SJ100E HPVOL ERJ6GEYJ471V 1/10W 470 MAIN ERDS2TJ102 1/4W 1K HPVOL ERJ6GEYJ221V 1/10W 220 MAIN ERJ6GEYJ104V 1/10W 100K MAIN ERJ6GEYJ103V 1/10W 10K MAIN ERDS2TJ472 1/4W 4.7K ERJ6GEYJ103V 1/10W 10K MAIN...
Page 11
ERJ6GEYJ123V 1/10W 12K MAIN Ref. No. Part No. Part Name & Description Remarks ERJ6GEYJ333V 1/10W 33K MAIN ERJ6GEYJ222V 1/10W 2.2K MAIN R65,66 ERJ6GEYJ333V 1/10W 33K MAIN R67,68 ERJ6GEYJ153V 1/10W 15K MAIN R69,70 ERJ6GEYJ222V 1/10W 2.2K MAIN ERJ6GEYJ152V 1/10W 1.5K MAIN ERJ6GEYJ222V 1/10W 2.2K MAIN...
Ref. No. Part No. Part Name & Description Remarks QEXGVH03115B WIRE WITH CONNECTOR QEXGSS05065A WIRE WITH CONNECTOR QEXGVH04070G WIRE WITH CONNECTOR QEXGSS16100B WIRE WITH CONNECTOR QEXGSS08065A WIRE WITH CONNECTOR SVQGA20MX040 20MHZ CERAMIC OSCILLATOR H2A200500003 MAIN QSXG1A1128A XTAL H0H112500002 MAIN EXBS8V471J MAIN ×...
SCHEMATIC DIAGRAM-1 NOTE: The number which noted at the connectors on the schematic diagram as "SCHEMATIC DIAGRAM-1" or "SCHEMATIC DIAGRAM-2" indicates the schematic diagram serial number located on the left corner in the schematic diagram. ACP CIRCUIT MAIN CIRCUIT PRODUCTS FOR GM GU POWER TRANSFORMER...
Page 27
W5 QEXGVH04070G PKB P.C.B. BLACK BLACK WHITE W1 QJLG013AA 12cm, 4 12cm, 4 ACP P.C.B. MAIN P.C.B. PEDAL IN POWER TRANSFORMER W2 QEXGVH03115B POWER SWITCH AC POWER CORD SW P.C.B. HPVOL P.C.B. W3 QEXGSS05065A CORE MKB1 P.C.B. MKB2 P.C.B.
Page 28
ORDER NO. EMID0007014C0 Digital Piano SX-PC25 Colour (K) ....Black Areas (P) U.S.A. Mexico (PC) Canada (EX) Norway, Sweden, Denmark, Finland, Spain, Portugal, Greece, South Africa (EZ) Germany (EG) Switzerland, France, Italy, Austria, Netherlands, Belgium (EB) the United Kingdom (XA) Argentina (XD) Hong Kong, Saudi Arabia, Kuwait (XT) Taiwan (XS) Malaysia, Singapore...
Page 29
SPECIFICATIONS SPECIFICATIONS KEYBOARD 88 KEYS (WITH TOUCH RESPONSE) SOUND GENERATOR MAX. POLYPHONY 32 NOTES (16 STEREO NOTES) SOUND GRAND, UPRIGHT, E PIANO, HARPSI, STRINGS, PIPE ORGAN PEDAL SOFT, SUSTAIN DIGITAL REVERB FUNCTIONS VOLUME, DEMO, TUNING, TRANSPOSE, TOUCH SENSITIVITY, REVERB, BASIC CHANNEL, LOCAL CONTROL TERMINALS PHONES ×...
cabinet, or on the part concerned. Please follow these safety precautions, and also those listed in the Owner'sManual. 2. Parts which have a ; mark in the circuit diagram or in the parts list are essential for safety. When replacing these parts, be sure to useonly the specified parts.
Page 31
4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc. 5. Before returning the serviced equipment to the customer, be sure to make the following insulation resistance test to prevent the customer from being exposed to a shock hazard. 2.2.
6. Parts Location 7. Disassembly Instructions 7.1. Removing the top cover and the keyboard cover [Fig. 1]...
Page 33
(Step2) Remove the top cover in the direction of arrows (refer to [Fig. 1] (Step3) Remove the keyboard cover in the direction of arrow (refer to [Fig. 1] 7.2. Removing the keyboard assembly - Follow the item 7.1. [Fig. 2] 7.3.
Page 34
7.3.2. Assembly (Step1) Insert the front part of the key into the chassis. (Step2) Insert the plate spring into the hammer notch (refer to [Fig. 4] (Step3) While slowly lowering the key into the chassis, insert the plate spring into the notch at the rear of the key (refer to [Fig.
Page 35
7.4. Disassembly of the pedal assembly (Step1) Remove the pedal assembly from the pedal box. (Step2) Disassemble the pedal assembly (refer to [Fig. 5] [Fig. 5] 7.5. Removing the printed circuit boards - Follow the item 7.1. - Pull out the connectors on the printed circuit boards. - ACP P.C.B.
(Step2) Remove the screw (refer to [Fig. 6] - MAIN P.C.B. (Step1) Remove the screw (refer to [Fig. 6] (Step2) Release the claws of the 5 P.C.B. holders. - HPVOL P.C.B. (Step1) Remove the 2 screws (refer to [Fig. 6] (Step2) Remove the volume knob.
The following changes in performance may occur in the Technics Digital Ensemble but do not indicate trouble. Phenomenon Remedy No sound is produced when the keyboard is No sound is produced if the MAIN VOLUME is set played. Use the sliding control to set the volume to an appropriate level.
Page 38
Oscilloscope VP-5730A”. Therefore the waveforms of musical tone signals shown may differ somewhat due to the difference in the timing of triggering. 2. Since the 1/10 test probe is used, the indicated voltage value on the bottom part of each waveform illustration is 1/10 of the actual value (e.g.
SPECIFICATION SYMBOL Fixed Carbon Film Resistors “FLAME-PROOF” (ERD—F—type) Fixed Wire Wound Resistors “FLAME-PROOF” (ERF—type) Fixed Metal Oxide Film Resistors “FLAME-PROOF” (ERG—type) Fixed Metal Film Resistors “FLAME-PROOF” (ERX—type) Fixed Metal Film Resistors (Precision and High Stability) (ERO—type) Fuse Type Fixed Metal Oxide Film Resistors “FLAME-PROOF”...
Page 42
*Important safety notice: / Components identified by mark have special characteristics important for safety. / Funrthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound (capacitors),low-noise (resistors), etc. are used. / When replacing any of components, be sure to use only manufacture’s specified parts shown in the parts list. *Capacity values are in microfarads (uF) unless specified otherwise, P=Pico-farads (pF) F=Farads (F) / *Resistance values are in ohms, unless specified otherwise, 1K=1,000 (OHM), 1M=1,000K (OHM)
Page 43
Ref. No. Part No. Part Name & Description Remarks QGKG0159AA ORNAMENT [SPC] QMFG1276AA FELT [SPC] QMFG1067AA FELT [SPC] K2AA2G000003 AC INLET COVER (X,XA,EX,EZ,EB,EG,EF,XD) [SPC] K2AA2G000003 AC INLET COVER (XT,XS,GN,EG,XD) [SPC] SJS9334A AC IN SOKET (P,PC) [SPC] QQLG147AA HEADPHONE LABEL [SPC] QLZG021A CORE (P,PC) [SPC]...
Page 44
Ref. No. Part No. Part Name & Description Remarks 18-4 QMRG7031EC PROTECTOR [SPC] 18-5 QMRG7032EC PROTECTOR [SPC] 18-6 QGKG0135AA ORNAMENT [SPC] 18-7 XTB3+6A SCREW [SPC] QMFG1026AA FELT [SPC] QKQGP029AAZK LEFT PLANK ASS'Y [SPC] SHRG9620A CRAMPER [SPC] QKQGD101AA CROSSBOARD [SPC] QKQGP030AAZK RIGHT PLANK ASS'Y [SPC] SNEG1760A...
Page 45
Ref. No. Part No. Part Name & Description Remarks QMWG6021AA RUBBER SWITCH [SPC] QMWG6020AA RUBBER SWITCH [SPC] QMWG8038AA HAMMER SUPPORT(WHITE KEY) [SPC] QMWG8039AA HAMMER SUPPORT(BLACK KEY) [SPC] QMWG8040AA FUL CU RUM(12 PCS,ON ONE) [SPC] QMWG8041AA FUL CU RUM(4 PCS,ON ONE) [SPC] QMWG8045AA KEY GUIDE...
Page 46
Ref. No. Part No. Part Name & Description Remarks ECRR1H104ZF 50V 0.1P HPVOL [SPC] ECKCVA1472MF 4.7U ACP [SPC] ECRF1H104ZF 25V 0.1U MKB2 [SPC] ECUV1H471JG 50V 470P MAIN [SPC] ECQU2A104MN 250V 0.1U ACP [SPC] ECRF1H104ZF 25V 0.1U MKB2 [SPC] C6,C7 ECUV1H104ZFX 50V 0.1U MAIN [SPC] ECUV1H104ZFX...
Page 47
Ref. No. Part No. Part Name & Description Remarks ECEA1CKA100 16V 10 MAIN [SPC] C92,93 ECUV1H104ZFX 50V 0.1U MAIN [SPC] C95-100 ECUV1H104ZFX 50V 0.1U MAIN [SPC] C101,02 ECEA1HKA010 50V 1U MAIN [SPC] C103,04 ECQV1H104JM 50V 0.1U MAIN [SPC] C105,06 ECUV1H102JX 50V 0.01U MAIN [SPC] C107...
Page 48
Ref. No. Part No. Part Name & Description Remarks MA8033H DIODE MAIN [SPC] MA111TX DIODE MAIN [SPC] MA165 DIODE MKB1 [SPC] MA111TX DIODE MAIN [SPC] MA165 DIODE MKB1 [SPC] EK04W DIODE MAIN [SPC] D16,17 MA165 DIODE MKB1 [SPC] MA8051L DIODE MAIN [SPC] D18-25 MA165...
Page 51
Ref. No. Part No. Part Name & Description Remarks ERJ6GEYJ681V 1/10W 680 MAIN [SPC] ERJ6GEYJ101V 1/10W 100 MAIN [SPC] ERJ6GEYJ222V 1/10W 2.2K MAIN [SPC] ERJ6GEYJ103V 1/10W 10K MAIN [SPC] ERJ6GEYJ221V 1/10W 220 MAIN [SPC] ERJ6GEY0R00V 1/10W 0 MAIN [SPC] ERJ6GEYJ105V 1/10W 1M MAIN [SPC] ERJ6GEYJ103V...
Page 52
Ref. No. Part No. Part Name & Description Remarks RJ1-3 ERDS2T0 1/4W 0 PKB [SPC] QSPG1010AA SW,POWER [SPC] S1-3 QSTGT001AA LEVER SWITCH PKB [SPC] SP1,2 QASG12P07A 12CM SP [SPC] EVQ21507K SW,TACT SW [SPC] QSRGT005AA VOLTAGE SELECTOR ACP [SPC] EVQ21507K SW,TACT SW [SPC] QTPG1M059A POWER TRANSFORMER...
SCHEMATIC DIAGRAM-1 NOTE: The number which noted at the connectors on the schematic diagram as "SCHEMATIC DIAGRAM-1" or "SCHEMATIC DIAGRAM-2" indicates the schematic diagram serial number located on the left corner in the schematic diagram. ACP CIRCUIT MAIN CIRCUIT PRODUCTS FOR POWER TRANSFORMER QSRGT005AA...
Page 77
Tone Signal MAIN Control Signal D2,D3 POWER RESET TRANSFORMER POWER SWITCH D4 D7 AC CORD IC13 REGULATOR Q4,Q5 +3.3V +3.3D REGULATOR Q11,Q12 RESET RA0-RA19 SD0MIX CONVERTER IC10 RESET DIGITAL RA0-RA19 Q9,Q10 SIGNAL 32M BIT PROCESSER DYNAMIC RD0-RD15 RD0-RD15 RESET A1-A4 ADDRESS BUS A1-A4 P57(AN7)
Page 78
HPVOL AUX IN R-CH AUX IN L-CH MAIN VOLUME HEADPHONE2 HEADPHONE1 IC6,7 POWER 12cm; 4 AMPLIFIER POWER INDICATOR 12cm; 4 PEDAL IN SOFT SOSUTENUTO SUSTAIN MIDI OUT PHOTO MIDI IN COUPLER SOUND MODE MKB1 MKB2 DECODER SWITCHES DECODER DECODER & DIODES SWITCHES &...
Page 79
W5QEXGVH04070F PKB P.C.B. BLACK BLACK WHITE W1 QJLG013AA 12cm, 4 12cm, 4 ACP P.C.B. MAIN P.C.B. PEDAL IN POWER TRANSFORMER W2 QEXGVH030708 POWER SWITCH AC POWER CORD HPVOL P.C.B. CORE MKB1 P.C.B. MKB2 P.C.B. QEXGSS16022C QEXGSS16022C...
Page 80
Follow the steps below to assemble your Technics piano. Make sure you are using the correct parts and that they are in the correct direction. • At least 2 people are required for assembly. • To disassemble the piano, reverse the procedure.
Page 81
Pedals Plug the power cord into the wall socket. Install the music stand (included). • Insert it into the two holes. Soft pedal Sustain pedal Open the keyboard cover. Sustain pedal • Open and close the cover gently. The sound fades gradually after the keys are released. Turn on the POWER button.
Page 82
⇒ While pressing the MODE SET button, press ⇒ While pressing the MODE SET button, press the keyboard key that corresponds to the the keyboard key that corresponds to REVERB desired TOUCH SENSITIVITY (LIGHT/ NOR- OFF or ON. • When the MODE SET button is pressed, its indicator MAL/HEAVY).
Need help?
Do you have a question about the SX-PC26P and is the answer not in the manual?
Questions and answers
I am not able to access volume switch
To fix the volume switch issue on the Technics SX-PC26P:
1. Use the sliding MAIN VOLUME control to set the volume to an appropriate level.
2. Check the MIDI LOCAL CONTROL setting. If it is set to "off," set it to "on."
3. If sound is distorted or quavers, check MIDI or COMPUTER terminal connections. Disconnect or adjust software settings to avoid duplicate sound signals.
4. Ensure the volume-related component (VR1: QRV09A01B14 V.R. VOLUME) is functioning properly. If faulty, consider replacing it.
Make sure the instrument is powered off before adjusting internal components.
This answer is automatically generated