Charge The Battery; Install The Battery; Memory Card - Motorola HINT QA30 Quick Start Manual

Hide thumbs Also See for HINT QA30:
Table of Contents

Advertisement

get started
battery
get started

install the battery

1
While pressing down on the
logo on the battery cover,
slide the cover toward the
top of the phone, then lift it
from thephone.
2
With the gold contacts facing
down and toward the lower
end of the battery, insert the
battery, lower end first.
3
Fit the battery cover back
onto the phone and slide it
forward into place.
get started
Charging from your computer:
Note:
Optional accessories required.
You can charge the battery by connecting a cable from
your phone's micro USB port to a high-power USB
connector on a computer (not a low-power one, such as
the USB connector on your keyboard or bus-powered
USB hub). Typically, USB high-power connectors are
located directly on your computer.
Both your phone and your computer must be turned on,
and you must have correct software drivers installed on
your computer. Cables and software drivers are available
in Motorola Original
data kits, sold separately.
TM
Note:
For battery use and battery safety information, see
your User's Guide.

charge the battery

New batteries are not fully charged. Before you can use
your phone, install and charge the battery. Some
batteries perform best after several full charge/discharge
cycles.
Using the charger:
1
Insert the charger into your
phone's micro USB connector.
Plug the other end of the
charger into an electrical
outlet.
2
When you see Charge Complete,
unplug the charger.
When you charge the battery, the battery level indicator
at the upper right of the screen shows charging
progress. At least one segment of the indicator must be
visible to ensure full phone functionality while charging.
7
8

memory card

Note:
Optional accessory required.
install & remove memory card
1
Remove the battery door from your phone (see
page 7). If necessary, remove the battery.
2
With the gold contacts
down, place the memory
card into the card opening,
then slide the card into the
slot.
3
Replace the battery and
battery door.
Caution:
phone is using it or writing files to it.
9
10
get started
get started
Don't remove your memory card while your

Advertisement

Table of Contents
loading

Table of Contents