Download Print this page

Motorola Miniblue H5 Quick Start Manual

Universal bluetooth headset

Advertisement

motorola
Miniblue H5
Universal Bluetooth
®
Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Headset
Take a moment before you get started to familiarize yourself with your new H5 Bluetooth
Handsfree Headset. Along with your headset, a portable charger base is provided for both
storage and on-the-go remote charging.
Volume
Buttons
Call
Button
Indicator
MOTOSTART
MOTOSTART
Get connected in 4 quick steps.
H5
Motorola, Inc.
3
TURN ON BLUETOOTH
Consumer Advocacy Office
1307 East Algonquin Road
ON YOUR PHONE AND
Schaumburg, IL 60196
PAIR WITH HEADSET
www.hellomoto.com
1-877-MOTOBLU
Your phone's Bluetooth feature is off by
1-888-390-6456 (TTY/TDD United States for
default. To use your headset, turn on the
hearing impaired)
Bluetooth feature in your phone.
Guide Number: 6809495A89-O
To turn on Bluetooth:
Menu
1
M
Select
(
Bluetooth Link > Setup.
2
Scroll to Power.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
3
Press Change.
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
4
Select On.
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
5
Select Back.
product or service names are the property of their respective
owners.
6
Select Handsfree.
© Motorola, Inc. 2006.
BEFORE YOU BEGIN
Earpiece
Speaker
Headset
Battery
Indicator
Microphone
Charger
(inside
Battery
earpiece)
Indicator
Light
TURN ON BLUETOOTH
ON YOUR PHONE AND
PAIR WITH HEADSET
7
Select [Look for Devices].
Note: Do not select STOP--you will automatically be
taken to the next screen.
> Settings > Connection >
)
8
Select Motorola Miniblue.
9
Select Yes to bond.
10
Enter the passkey 0000 and select OK.
When your headset and phone are
successfully paired, the indicator light on your
headset will change from steadily lit to
flashing.
Note: This procedure is for most Motorola phones. For
other phones, see your phone's user's guide or visit
www.hellomoto.com/bluetoothsupport and click Set Up
My New Product.
1
CHARGE YOUR
HEADSET
1
Plug Motorola power supply into charger port
on portable charger base. The Charger
Battery indicator light (-) turns on.
Note: If using a Dual Charging Adapter (sold separately),
plug the "Phone side" of cable into the charger base.
2
Insert headset snugly
into portable charger
base. The Headset
Battery indicator light
(+) turns on.
When headset's battery
is fully charged (about 3
Charger
hours), the Headset
Battery indicator light
Plug
turns off.
3
When headset is fully charged, remove from
portable charger base.
Note: The charger base will continue to charge. When
fully charged (about 6.5 hours), the Charger Battery
indicator light turns off.
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
1
Place the headset in your ear. The eartip
should be inserted so that the headset
feels comfortable and forms a seal in the
ear.
Note: See "Eartips and Your Headset" on the reverse
side of this guide for more information on using eartips
with your headset.
2
On your phone, dial the number you want
to call and press the SEND key.
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
2
TROUBLESHOOTING
PUT YOUR HEADSET
IN PAIRING MODE
My phone doesn't find my headset.
Make sure the indicator light on your
headset is steadily lit when your phone is
Before you can use your headset, you must pair
searching for devices (see step
(link) it with your phone.
My headset worked before but now it's
not working.
Call
Make sure your phone is on and the
Indicator
Button
Bluetooth feature is turned on in your phone
Light
(see step
). If the Bluetooth feature has
3
been turned off or was turned on only
1
Ensure the headset is turned off (indicator
temporarily, you may need to restart the
light not blinking).
Bluetooth feature (see step
confirmed the Bluetooth feature is on in
Note: See "Turning On and Off" on the reverse side of this guide
your phone, pair your phone and headset
for details on turning off your headset.
again (see step
2
Press and hold the Call button for 6 to 10
Support.
seconds. The indicator light will initially flash,
If you need more help, contact us at
but continue to hold down the button until
1-877-MOTOBLU or visit us at
the indicator light is steadily lit.
www.hellomoto.com/bluetooth and click
If the indicator light is flashing or not steadily
Support.
lit when releasing the button, repeat both
steps 1 and 2 on this page.
USING YOUR
USING YOUR H5
PORTABLE CHARGER
Features and
BASE
Functions Guide
on the reverse side
The portable charger base provided with your
for information on
headset can be used to cordlessly recharge
using your H5.
your headset anywhere. Once charged, the
portable charger base provides power
on-the-go, extending your talk time by
constantly "topping off" your headset's battery.
Using the included Motorola power supply, you
can charge both the portable charger base and
headset at the same time. The portable base
charger provides two indicator lights for
charging status. See "Indicator Lights" in the
reverse side of this guide for information on
these indicator lights.
Note: Using your PC's USB port as a power source for
charging is not recommended.
).
2
). If you have
3
).
3
See

Advertisement

loading

Summary of Contents for Motorola Miniblue H5

  • Page 1 My phone doesn't find my headset. Universal Bluetooth ® Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Make sure the indicator light on your Headset Plug Motorola power supply into charger port...
  • Page 2 Accessing call functions depends upon which profile your or both Volume buttons Note: After 5 minutes of inactivity, the light stops flashing to phone supports. See your phone's user's guide for more buttons for 1-2 sec. conserve power, but the headset remains in standby mode.