Download Print this page

Motorola H700 Quick Start

Bluetooth handsfree headset.
Hide thumbs
   

Advertisement

H700
Bluetooth®
Handsfree Headset
Get Connected in
4 Quick Steps
1 - CHARGE
2 - START
BLUETOOTH
FEATURE
3 - PAIR
4 - TEST AND
USE
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809499A88-O
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and
their accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2005.
BEFORE YOU
BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H700 Headset.
Multi-Color
Indicator Light
Boom
Microphone
Volume
Buttons
Call
Button
Speaker
(on reverse
side)
PAIR
3
CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
Menu
>
1
On your Motorola phone, press
(
)
M(
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2
Select
Motorola H700.
3
Select
or
to pair your headset with
OK
Yes
your phone.
4
Enter the passkey:
0000
5
Select OK.
When your headset successfully pairs with
your phone, the indicator light changes from
steadily lit to flashing blue.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
1
CHARGE
Your Headset's Battery
1
Plug the Motorola charger into the end of
the headset.
The indicator light turns red when the
battery is charging. It may take up to 1
minute for the indicator light to turn on.
When the headset's battery is fully charged
(about 2 hours), the indicator light turns
green.
2
Disconnect the charger.
Note: Headset is not functional while charging.

TEST AND USE

4
Your phone and headset are now paired
and ready to make and receive calls.
To make a call:
1
Open the headset boom and place the
headset over your ear.
2
On the phone, dial the number you want to
call and press SEND key on your phone.
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, turn OFF the
headset when you don't use it for an
extended time by closing the boom.
2
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
Menu
> Settings > Connection >
1
Press
M(
(
)
Bluetooth Link > Setup.
2
Scroll to
Power.
3
Select
Change.
4
Scroll to
On.
5
Press
to turn on the Bluetooth
Select
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
USING YOUR H700
See
Features and
Functions Guide
on the reverse side
for information on
using your H700.
3
PAIR
Your Headset
Before you can use your headset, you must pair
(link) it with your phone.
Step A - PUT THE HEADSET IN PAIRING
MODE
The headset indicator light will be steadily lit in
purple when in pairing mode. To place the
headset in pairing mode:
If the headset has never been paired with
another device, simply open the headset
boom. The indicator light becomes steadily lit
in purple.
If the headset has previously been paired
with other devices, first ensure those
devices are turned off. Then open the headset
boom and the indicator light flashes in blue.
After about 5 seconds, the indicator light
becomes steadily lit in purple.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is flashing in blue, turn off the other device
and wait for 10 seconds. The indicator light
becomes steadily lit in purple indicating the
headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in purple) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support

Advertisement

   Also See for Motorola H700

   Related Manuals for Motorola H700

   Summary of Contents for Motorola H700

  • Page 1: Test And Use

    The phone lists Bluetooth devices it finds. Select Motorola H700. Select MOTOROLA and the Stylized M Logo are registered in the US your phone. Patent & Trademark Office. The use of wireless devices and Enter the passkey: their accessories may be prohibited or restricted in certain areas.

  • Page 2: Indicator Lights

    CHANGING FOR USE CHANGING VOLUME ON OTHER EAR BUTTON ORIENTATION You can wear your H700 headset on your left or You can also change the orientation of the right ear. The headset comes ready for the right volume buttons on your headset.

This manual also for:

Hs700, Qg-h700, H560 - headset - over-the-ear

Comments to this Manuals

Symbols: 0
Latest comments: