LawnMaster LMCG260EH Safety And Operating Manual
3300 psi petrol high pressure cleaner
Hide thumbs
Also See for LMCG260EH:
- Safety and operating manual (16 pages) ,
- Safety and operating manual (16 pages)
Related Manuals for LawnMaster LMCG260EH
Summary of Contents for LawnMaster LMCG260EH
- Page 1 3300 PSI PETROL HIGH PRESSURE CLEANER SAFETY AND OPERATING MANUAL PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE UNIT LMCG260EH LMPCHP3300-A PROUDLY A STEELFORT PRODUCT NZ OWNED...
-
Page 2: Table Of Contents
TABLE OF CONTENTS OPERATOR SAFETY Safety Rules FEATURES & TECHNICAL DATA OPERATION & ASSEMBLY Unpacking Assembly Operating Checklist Changing Dipstick Engine Oil/Fuel Soap Solution Accessory Assemble Starting & Stopping Engine MAINTENANCE Maintenance Schedule Engine Oil Changing Oil Foam & Paper Filter Spark Plug Valve Lash Adjustment Pressure Jet... -
Page 3: Operator Safety
Thank you for purchasing our LawnMaster when operating this product, as these are factors LMPCHP3300-A High Pressure Cleaner, the which cannot be built into this manual. information contained within this manual will help you to have many years of safe and trouble free use DO NOT operate this pressure cleaner until you of this LawnMaster product. - Page 4 • Position pressure cleaner carefully to avoid • Store fuel in a cool, well-ventilated area, safely grass discoloration from engine heat. away from spark-producing equipment, in a • NEVER spray water at people, pets, or electrical container specifically designed for it. devices.
-
Page 5: Features & Technical Data
FEATURES & TECHNICAL DATA Pressure Jet Fuel Cap Engine Switch Gun Barrel Connecting Nut Dipstick Water Outlet Air Filter Choke Lever Soap Solution Po Pressure Pipe Speed Control Handle Pistol Grip Recoil Starter Fuel Switch Handrail Rack A STEELFORT PRODUCT... - Page 6 3420PSI (23.6Mpa) Loading Speed 3400-3500 (r/min) Note: Any changes to the engine or related data for your pressure cleaner may not be communicated. Engine may difference in various areas, please contact your local LawnMaster dealer for engine information. A STEELFORT PRODUCT...
-
Page 7: Operation & Assembly
OPERATION & ASSEMBLY a well-ventilated area and only operating cleaner in a suitable usage, consult your local LawnMaster dealer if you have any question UNPACKING about engine usage. • Place the cleaner on a stable and flat surface, Place the shipping carton on a solid, flat and keep surroundings clean and dry. - Page 8 stopped. Remove the dipstick and wipe it clean. Reinstall dipstick into tube; rest on oil fill neck, DO NOT thread cap into tube. Remove the dipstick again and check oil level. DO NOT mix oil with petrol. Level should be at top of indicator on dipstick. Be sure not to fill above the upper limit mark.
-
Page 9: Soap Solution
5. SOAP SOLUTION Connect the gun barrel with pistol grip. Open the pot cap to add soap solution. Connect the pistol grip with high pressure pipe. Add Soap Solution MAX: 3.97L Select jet CAUTION Do not use any detergent with function of bleaching or solution. - Page 10 OFF position when it’ s below 20°C. MANUAL STARTING WARNING Check starter cord conditions before operating. Have it replaced immediately by local LawnMaster dealer if cord is frayed. When starting engine, grasp the recoil starter handle and pull slowly until resistance is felt.
- Page 11 CAUTION functions, so choose the appropriate one for optimal If the engine fails to start after three attempts or washing effectiveness and to protect the surface stalls shortly after starting, check to ensure that the being cleaned high-pressure cleaner is placed on a flat surface and DANGER that there is enough oil in the engine.
-
Page 12: Maintenance
Remove the water pipe. The way to stop engine on emergence: remove the spark plug or turn the stop lever to “O” To stop the engine in an emergency: remove the spark plug or turn the stop lever to “O” position. DANGER Do not stop engine with load unless any emergency happens. -
Page 13: Maintenance Schedule
Oil Tube Inspection * 1: Before each season and after then (whichever comes first). * 2: Service more frequently under severe, dusty, dirty conditions. * 3: To be performed by knowledgeable, experienced owners or a LawnMaster service dealer. A STEELFORT PRODUCT... -
Page 14: Engine Oil
GENERAL MAINTENANCE CAUTION - OIL LEVEL CHECK Reinstall dipstick into tube; rest on oil fill neck, DO NOT thread cap into tube. • Use a wet cloth to clean surface of the cleaner. • Use a soft brusher to remove the dirty and oil Tighten the dipstick. -
Page 15: Spark Plug
PAPER FILTER ELEMENT: by the company in the factory. Generally, the machine Tap the hard surface of the filter element several can work properly without any adjustments. After use times to dislodge the dirt. Do not use a brush to for sometime you may need adjust the gap as follows: remove the dirt, as this can cause it to fall into the filter paper. -
Page 16: Trouble Analysis & Troubleshooting
Carbon store in spark plug. Remove the carbon. If problems still not be solved according to above problem shooting or other problem caused during operation, contact your local authorised LawnMaster dealer for help. Unauthorised disassemble will void your warranty. A STEELFORT PRODUCT... -
Page 17: Storage & Transportation
Only genuine spare parts can be used for repairs and this must be carried out by an authorised LawnMaster Services Dealer to maintain warranty. - Page 18 FIND US www.lawnmaster.co.nz lawnmasternz Steelfort Steelfort Auckland 500 Rangitikei Street, Private Bag 11045 880 Great South Road, Penrose Palmerston North, 4412, New Zealand Auckland, 1061, New Zealand 06 350 1350 09 573 1324...
Need help?
Do you have a question about the LMCG260EH and is the answer not in the manual?
Questions and answers