Icom UX-S92A Instructions

O
IC O M
INSTRUCTIONS
144 MHz SSB BAND UNIT Thank you for purchasing the UX-S92A/E 144 MHz SSB
UNIT. The unit is designed for the IC-901A/E. By con-
U XxX =
S 9 2 A
necting the unit to the IC-901A/E, the transceiver is up-
graded and functions in SSB and CW as well as FM
UX-S92E rodes
Please read the transceiver's instruction manual for oper-
ation information. .
FOREWORD
There are two ways to install the UX-S92A/E to the IC-901A/E;
one is for standard one-body style installation; the other is
for separate style installation. Select the installation to suit
your needs.
UX-S92A/E
installation
Before installing the unit, some preparations are necessary
for either type of installation. See the pre-work instructions
on the next page. .
1-body style Shorter separate Longer separate
installation installation installation
MB-31 MB-31 EX-766
(EX-767)
E SYSTEM UPGRADING SIMULATIONS CAIRN Eo
e 1-BODY STYLE INSTALLATION
The UX-S92A/E is mounted on the IC-901A/E. When
mounting the UX-S92A/E on the transceiver, the optional
MB-31 is necessary.
When mounting more than two band units on the tran-
sceiver, the optional EX-767 is necessary.
The UX-S92A/E is mounted on the main body of the
IC-901A/E and the front panel of the transceiver is
detached using the supplied remote control cable. When
mounting the UX-S92/E on the transceiver, the optional
MB-31 is necessary.
When mounting more than two band units on the tran-
sceiver, the optional EX-767 is necessary.
The UX-S92A/E is mounted on the main body of the
IC-901A/E. The front panel of the transceiver is detached
using the supplied remote control cable and an optional
optical fiber cable up to 5 meters long.
The optional EX-766 and MB-32 are necessary for install-
ing the system in the trunk. When more than two band
units are installed, the optional EX-767 is also necessary.
— =
EX-766 = ©, BS |
É
INTERFACE UNIT-A