Nice NX STAR MZ 2017 SH Instructions And Warnings For Installation And Use
Tubular motor
Hide thumbs
Also See for NX STAR MZ 2017 SH:
- Instructions and warnings for installation and use (50 pages) ,
- Quick manual (2 pages) ,
- Quick manual (2 pages)
Subscribe to Our Youtube Channel
Related Manuals for Nice NX STAR MZ 2017 SH
Summary of Contents for Nice NX STAR MZ 2017 SH
- Page 1 Nice NX STAR MZ 2017 SH Tubular Motor EN - Instructions and warnings for installation and use...
-
Page 2: Installation Warnings
GENERAL WARNINGS: SAFETY - INSTALLATION - USE (original instructions in Italian) ATTENTION Important safety instructions. Follow all instructions as improper installation may cause serious damage ATTENTION Important safety instructions. It is important for you to comply with these instructions for your own and other people’s safety. -
Page 3: Product Description And Intended Use
• is equipped with a “thermal protection device” which, in case of extended use, pro- tion” section, in the Nice Product Catalogue – www.niceforyou.com). In particular, tect the motor against excessive overheating by limiting the motor speed to the min- do not install the product if its motor torque is lower than that needed to imum speed;... -
Page 4: Programming And Adjustments
• The power cable is connected to the motor via a connector; this is removable (fig. To assemble and install the motor, refer to fig. 3. Moreover, consult the Nice product 3-h) and allows the replacement of the cable (refer to the “Nice Screen” product catalogue or go to www.niceforyou.com to choose the crown of the limit switch (fig. - Page 5 Support for fixing the motor head. Cap for fixing the roller to the bracket (not included). Removing the connector if necessary 10 mm English – 4...
- Page 6 4.1.1 - Report messages sent by the motor regardless of their direction. The movements are indicated in the procedures with a number followed by the symbol The motor repeats the report message on the status of the installation by performing –...
- Page 7 A.2 - AUTOMATIC Programming of the UP (“0”) and DOWN (“1”) limit switches NOTES AND WARNINGS • Use this procedure only for roller shutters equipped with mechanical locking devices. • Programme the UP limit switch (0) FIRST. • The down limit switch (1) is NOT memorised if it is within 120° with respect to the UP limit switch (0). •...
- Page 8 A.4 - Adjusting the motor’s sensitivity to obstacles NOTES AND WARNINGS • Use this procedure to activate, adjust or deactivate the safety system that: a) detects the presence of an obstacle along the travel of the roller shutter; b) reduces the motor tension on the roller shutter when it is stationary at the Upper limit switch “0”...
- Page 9 4 6 (x ...) 2 OPTIONS: 1 press = FRT height setting function activation ...?... 2 presses = FRT deactivated Press and release the button the number of times indicated in the wait for the motor to perform a number of movements also release button t.
- Page 10 continues = ... “ 1 ” “1” “S” “S” Hold down the button ... until the awning reaches the suitable “S” press the buttons until you reach the position (in addition to point “1”); desired position. 5 = 3 sec Hold down both buttons...
- Page 11 A.8 - Adjusting the motor speed NOTES AND WARNINGS • This procedure can be used to vary the rotation speed of the motor by choosing between two levelsi. 2 ...?... Hold down both buttons... count 2 movements; wait without releasing count 3 movements;...
- Page 12 A.10 - TOTAL or PARTIAL deletion of memory A.10.1 - TOTAL memory deletion NOTES AND WARNINGS • If during the execution of the procedure you choose the option “5 presses = clear ALL MEMORY”, the system restores the factory settings by clearing the “0” and “1”...
- Page 13 In general, the motors in the “NEXT” line were designed for residential use and there- 20° C (± 5° C). • Nice S.p.A. reserves the right to apply modifications to products fore for discontinuous use. The motor is designed for residential use, in other words, at any time when deemed necessary, maintaining the same intended use and func- for intermittent service.
- Page 14 13 – English...
- Page 15 English – 14...
- Page 16 Nice SpA Via Callalta, 1 31046 Oderzo TV Italy www.niceforyou.com info@niceforyou.com...
Need help?
Do you have a question about the NX STAR MZ 2017 SH and is the answer not in the manual?
Questions and answers