Remote Control - Boss Audio Systems BV9650 User Manual

Before You Start
01

Remote Control

2 0
Tips:
For more information as to replacing battery, please refer to Replacing the Battery
on page 6.
8
VCD/CD
System Switch
During VCD mode, Press P/N on rem-
ote control to set the TV standard to PAL or
NTSC or AUTO system.
AUTO NTSC
PAL
Note:
The function is only valid on remote control.
*
Slow motion playback
During VCD mode, press to slow
forward or slow backward. There are
speeds as follow:.
1/ 2 1/ 4 1/8
Note:
The function is only valid on remote control.
*
Increase the size of the picture
9
ZOOM to
During VCD mode, Press
increase the picture in size. There are sizes
as follow, Each pressing increases the size
until the maximum size is reached.
2X 3X 4X
No Change
Note:
The function is only valid on remote control.
*
To remove the image by pressing button.
* 27
On Screen Display
During VCD/CD status, brief press
8
OSD button the display shows:
Title elapsed time Title remain time
Chapter
chapter
OFF
elapsed time
remain time
Press and hold OSD to display the curr-
8
ent setup.
Note:
Press the DISP button on the head unit
*
performs the same function.
Setting the Playback Time
During CD playback, firstly press 2 GOTO,
and TFT shows : disc playback time:--:--,
press your desired time of the playback by
using number buttons.
Secondly press GOTO button, the tracks
time appears on TFT, also input your desired
numbers to play the current time of your
selection.
2
During VCD mode, press GOTO button
to set the playing time, when the TFT dis-
play : title /chapter/sound/captions/angle
/title time/chapter time/repeat playing
/time option. Press [ ][ ] to select the
options, press ENTER to set the status.
Then press 23 NUMBER BUTTONS or
[ ][ ] to set the current status.
Note:
* This function is operated by using the remote
control.
33
07