Boss Audio Systems BV9650 User Manual page 6

Before You Start
01
Maintenance
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fu-
ses. If the fuse is blown, check the po-
wer connection and replace with a n-
ew one. If the same problem occurs,
it would be subjected to the malfun-
ction. In such cases, please consult
to the nearest service dealer.
Warning
!
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Replacing the Battery
When the range of the operation of t-
he card remote control becomes short
or no functions while operating. Rep-
lace the lithium battery with a new b-
utton cell (CR2025). Make sure the b-
attery polarity before replace.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
6
Insert the Battery Holder into the Remote
Control.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Make sure the proper polarity when
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
Warning!
!
Improper handle with the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
Tuner
Listening to the radio
2 3
1
FM3 P.CH:1 87.50MHz
MONO
6
P1:87.50MHz P2:90.00MHz
P3:87.50MHz P4:87.50MHz
P5:87.50MHz P6:87.50MHz
4 EQ.OF F L OUD.OFF
5
1 Band Indicator
Shows which band the radio is tuned
to.
2
Preset Number Indicator
Shows what preset has been selected.
Frequency Indicator
3
Shows which frequency the tuner is
tuned.
EQ Indicator
4
Shows the EQ Setting of the radio.
5
MBP Indicator
Shows that MBP is on or off.
6
The 6 stations of the current band.
Band Selector
During radio status, repeatedly press
3
BAND button to select bands in the
fol lowing order:
FM1 FM3
FM2
AM2 AM1
(For Two Bands)
FM1 FM3
FM2
LW MW2 MW1
(For Three Bands)
Note:
* Press BAND on the head unit performs the
same function.
Manual/Automatic Tuning
Manual Tuning: ress P ( or ) button
on the remote control continuously to select
a station downward or upward respectively.
Automatic Tuning: ress and P hold ( or
) button for more than 3 seconds, the ra-
dio automatically searches a station down-
ward or upward respectively and plays when
it finds a station.
Note:
Press and button on the head unit per-
*
forms the same function.
DX/LOC Selector
During radio status, press 5 LOC button
to select strong or weak station reception.
LOC ap pears on the display and only
local sta tion is available. when it disappears
b oth distance and local stations can be
received.
Note:
The function is only valid on remote control.
*
The function is invalid in AM tuning.
*
Selecting the Stored Station
During radio status, press 27 button to
select the stored station upward, press to
select the stored station downward.
Note:
Press or button on the head unit performs
*
the same function.
35
08