Boss Audio Systems BV9650 User Manual page 5

Tuner
08
MO/ST Selector
During radio status, you can press
6
button on the remote control to select
NO mode or STEREO mode.
Stereo reception is charged when steoer
appears.
It is switched to MONO mode when
appears.
Note:
It is only valid on remote control.
*
Switch to MONO compulsively to improve
*
the listening quality when week signal.
It is only valid in FM tuning.
*
Scanning/Memorizing Stations
Automatically
During radio status, you can press 4 AMS
button on the remote control to scan each
stored station 5 seconds respectively wh-
ich stored in Number Buttons (from 1
23
to 6) . You can press the cor responding N-
umber Buttons or AMS but ton when your
desired station is charged. And it starts pl-
aying that station.
4
AMS
When press and hold button
more than 2 seconds, it will activate auto-
matically memory storing function. The
radio automatically selects a station and
23 Number
has it stored in any one of the
Buttons (from1 to 6).
Note:
* The unit can be stored up to 6 stations
each band.
* It is operated only by remote control.
36
Number Buttons
ST During radio status, press Number
Buttons to receive the stored stations.
MO-
During radio status, Number Buttons
(from 1 to 6)
23 can help you
ur favorite station. You can follow the
mono as below:
1
When receiving a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
4
2
Press AMS button to receive stations
automatically, and store them in 1 to 6
number respectively.
3 Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number bu-
tton.
Note:
It is only valid on remote control.
*
for
On Screen Display
During radio status, keep pressing
OSD to display the current mode; briefly
pressing it
to switch between RDS setup
and preset frequencies.
Note:
for
* Press the DISP button on the head unit performs
the same function.
Before You Start
PRECAUTIONS
This unit can play the following discs only:
Type of disc
store yo-
steps
DVD
VCD
CD
MP3
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not work in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
8
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Handle the disc by its edge to keep
the disc clean, and do not touch
the surface.
Besides playing the discs above, the unit also can be connected to CD Changer and other connector.
Please refer to the details on page 18 before you playing them.
Label on the disc Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Do not use your CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown as the picture)
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown as the picture)
01
Size of disc
5