XLOCK H30 Product Sheet

// INCLUDED PARTS
Lock H30
Emergency
2 Mechanical keys
opening
Front panel, Back panel, XLOCK Key fob 1, Waterproof rubber
plate 2, U-Clip, 60 mm square shaft 2, 80 mm square shaft 2, M4
Accessory and
*40 mm screws, M4 *50 mm screws, M4 * 60 mm screws, M3
Mounting
* 8 mm screws, Mechanical key 2, Hexagon, Hexagon screw for
handle fixation (spare part)
// IMPORTANT
• We recommend that you use lithium batteries from Energizer.
• If the handle is exposed to rain/water, please make sure to wipe the handle dry.
// RESET
The reset button you can find in the battery compartment of
the inner panel. Press the reset button for about 5 seconds
until a long sound arises. The handle might ask for an
initialisation passcode. This passcode is "0000#". The handle
then approves the reset.
// GUIDES AND MORE
Please scan the QR code with your Smartphone and a
website with all the information will open.
If you are working on a PC, you can click on the QR
code and a website with all the information will open.
// PACKAGING
Packaging can be disposed free of charge at the appropriate collection points -
paper in the paper garbage can, plastics in the yellow bag and glass in the used
glass container.
// DISPOSABLE INFO
According to the European WEEE Directive, electrical and electronic
equipment must not be disposed of with household waste. Their components
must be recycled or disposed of separately, because toxic and hazardous
components can cause lasting damage to health and the environment if disposed
of improperly. As a consumer, you are obliged under the Electrical and Electronic
Equipment Act (ElektroG) to return electrical and electronic equipment free of charge
at the end of its service life to the manufacturer, the point of sale or to public collection
points set up for this purpose. Details are regulated by the respective state law. The
symbol on the product, the operating instructions and/or the packaging indicates these
regulations. By separating, recycling and disposing of old equipment in this way, you are
making an important contribution to protecting our environment.
© XLOCK. Errors and misprints excepted.
Product sheet - English
XLOCK H30
// TECHNICAL DETAILS
Size 300mm x 60mm x 21mm
Material Die-cast zinc and galvanized steel
Temperature -25°C to +55°C
Battery 4 x AAA Energizer lithium batteries (to be ordered separately)
Battery life Up to 20,000 openings, 2+ years
XL Lock Manager App (iOS, Android)
Compatibility
Web Interface (www.xlock.app)
Accessibility Smartphone via Bluetooth, ID Card, PIN Code, Fingerprint
Gateway Compatible (to be ordered separately)
Emergency
Micro USB and Mechanical key
opening
Unlimited smartphone users via XL Lock Manager App, up to
Memory
200 ID cards, up to 150 PIN Codes, up to 100 fingerprints
IP class IP54 exterior (splash-proof)
// MAINTENANCE
• Use only a dry and soft cloth for cleaning.
• Do not use any cleaning agents or chemicals.
• Store the product in a cool and dry place.
• Store the product out of reach of children and in a dry and
dust-protected
environment when not in use for a longer period of time.
• Keep the original packaging for transport.
XLOCK is a registered trademark of XLOCK GmbH, declares that the product
meets the essential requirements and directives European regulations.