Asus D700SC Service Manual
Hide thumbs Also See for D700SC:

Advertisement

Quick Links

Service Overview
D700SC_Service_manual
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC.("ASUS").
ASUS PROVIDES THIS MANUAL "AS IS"WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR
DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR INTHIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners' benefit, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE
FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECTTO CHANGE AT
ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A
COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY
ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE
PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright ○
2023 ASUSTeK COMPUTER INC. All Rights Reserved.
c
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS' part or other liability, you are entitled to
recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to
claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death)
and damage to real property and tangible personal property; or any other actual and direct damages resulted
from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract
price of each product.
1-1
V1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D700SC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Asus D700SC

  • Page 1 2023 ASUSTeK COMPUTER INC. All Rights Reserved. LIMITATION OF LIABILITY Circumstances may arise where because of a default on ASUS' part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property;...
  • Page 2 Service Overview ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS' suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
  • Page 3: Service Overview

    Desktop and necessary cautions and tools before performing any service and repairs. o provide the best service and support for the ASUS DESKTOP D700SC D700SA we have provided the below information for technicians from distributors and resellers to perform the complete Desktop disassembly and assembly.
  • Page 4 Disassembly Procedure DESK TOP PC D700S Overview The illustrations below show the Desktop PC’s overview from front view, side view and back view. Most of the parts will be discussed in this manual. FRONT VIEW(D700SA) Refer to the following diagram to identify the components on this front of the system. 2 - 4...
  • Page 5 Disassembly Procedure FRONT VIEW(D700SC) Refer to the following diagram to identify the components on this front of the system. 2 - 5...
  • Page 6: Front Bezel

    Disassembly Procedure Components The illustrations below show the components of the D830MT/D630MT/D520MT-K. FRONT BEZEL FRONT BEZEL ASSY According to shipments on location Hard Disk Drive According to shipments on location 2 - 6...
  • Page 7 Disassembly Procedure According to shipments on location According to shipments on location 2 - 7...
  • Page 8: Mother Board

    Disassembly Procedure Mother Board Memory According to shipments on location 2 - 8...
  • Page 9: Wlan Module

    Disassembly Procedure Power Supply According to shipments on location VGA CARD D700SA WLAN Module 2 - 9...
  • Page 10 Disassembly Procedure FAN DUCT According to shipments on location SW BOARD According to shipments on location 2 - 10...
  • Page 11: Smart Board

    Disassembly Procedure SMART BOARD According to shipments on location HDD HOUSING Cable & Others ODD & Cable According to shipments on location 2 - 11...
  • Page 12 Disassembly Procedure HDD CABLE According to shipments on location HDD PW CABLE SW cable SMART BOARD cable ( W.H CABLE 2.54 1*5P TO 5P) 2 - 12...
  • Page 13 Disassembly Procedure COM PORT 2 - 13...
  • Page 14: Disassembly And Assembly

    Be sure to use proper tools described before. SUS Desktop PC D700SC SA consists of various modules. This chapter describes the procedures for the complete Desk Top PC disassembly and assembly (Assemble process please look up from the last page). In addition, in between procedures, the detailed disassembly procedure of individual modules will be provided for your service needs.
  • Page 15 Disassembly Procedure Appropriate Tools The illustrations below show the appropriate tools that should be used for the Desktop service and repair. Automatic Screwdriver Plastic Blade Antistatic Gloves 2 - 15...
  • Page 16: Power Off

    Disassembly Procedure POWER OFF The illustrations below show how to remove the power cable from the Desk Top PC. 1.Remove the power cord by pulling it from the arrow side. Parts AC POWER CORD BSMI/3P/3C ⚫ 2 - 16...
  • Page 17: Side Cover

    The illustrations below show how to remove the side cover from the Device. 1.Loosen the screw of red circle, if you will latch it, please following the step back.(the example is D700SC D700SCES M700SC) 2.Pulling out the left side deco bezel.
  • Page 18 Disassembly Procedure Front Bezel The illustrations below show how to remove the Front Bezel from the Device 1. Press the arrow to lift the clasp 2. Remove the Front Bazel slowly. Assemble Notice: 2 - 18...
  • Page 19 Disassembly Procedure 2 - 19...
  • Page 20 Disassembly Procedure 3. The Front of device. Parts ⚫ FRONT BEZEL ASSY//SUNPRO 2 - 20...
  • Page 21 Desk Top PC. 1. Open the cover in the direction of the arrow 2. Remove 2 Screw from the FAN DUCT. M3*6L (6.0,0.95) (F) 4+/-10% kgf-cm For D700SC There are some differences between D700SA and D700SC on FAN DUCT. 2 - 21...
  • Page 22 Disassembly Procedure 3. Remove 2 Screw from the FAN DUCT REAR 2 - 22...
  • Page 23 Disassembly Procedure Parts ⚫ Total screw *11 ⚫ FAN DUCT//順榮興 ⚫ FAN DUCT REAR//順榮興 2 - 23...
  • Page 24: Memory Module

    Disassembly Procedure Memory Module The illustrations below show how to remove the power cable from the Desk Top PC. Press the button in the direction of the arrow. Hold both sides of the memory module with both hands and pull it out vertically. Parts ⚫...
  • Page 25 Disassembly Procedure VGA CARD The illustrations below show how to remove the VGA CARD from the Desk Top PC 1.Remove 2 screws on the PCI iron of the top cover 2.Take out the VGA CARD 2 - 25...
  • Page 26 Disassembly Procedure Parts VGA CARD*1 ⚫ ⚫ Total screws 2 2 - 26...
  • Page 27 Disassembly Procedure WLAN Module The illustrations below show how to remove the WLAN Module from the Desk Top PC Remove the external WIFI antenna Remove 1 screw on the WLAN card and disconnect WIFI antenna. 2 - 27...
  • Page 28 Disassembly Procedure Assemble Notice Lock screw for fixing the wifi board on the MB in accordance with graphic presentation. 2 - 28...
  • Page 29 Disassembly Procedure Arrange the RF cable into the wire saddle follow the picture as shown. Parts WIFI5 AC+BT4.2(2*2) M.2//INTEL/8265.NGWMG 946658*1 ⚫ Total screws 1 ⚫ 2 - 29...
  • Page 30 Disassembly Procedure The illustrations below show how to remove the SSD from the Desk Top PC Remove 1 screw on the SSD and take out it. 2 - 30...
  • Page 31 Disassembly Procedure Parts ⚫ SSD P3X2(VAL) 512GB M2 2280*1 ⚫ SSD PAD*1 ⚫ Total screws 1 2 - 31...
  • Page 32: Power Supply

    Disassembly Procedure POWER SUPPLY The illustrations below show how to remove the power supply from the Device. 1.Cut the white cable tie and disconnect and disconnect CPU Power Supply cables (4 PIN and 6PIN) 2 - 32...
  • Page 33 Disassembly Procedure 2.Remove 3 screws from the PSU and take out it SCREW #6-32 L6*H2.3 (B) :8+0/-0.5 kgf-cm PSU assemble Notice: 2 - 33...
  • Page 34 Disassembly Procedure Parts ⚫ Total screw *3 ⚫ PSU TFX ODD & HDD The illustrations below show how to remove the ODD & HDD from the Device. 1.Disconnect ODD cable , ODD power cable. Remove 3 screws from the ODD TOOLESS HOLDER and take out it 2 - 34...
  • Page 35 Disassembly Procedure 2.Disconnect HDD&ODD Power Supply cable. Disconnect the ODD BEZEL. 2 - 35...
  • Page 36 Disassembly Procedure 3.Disconnect HDD cable,HDD power cable and take out it 2 - 36...
  • Page 37 Disassembly Procedure HDD Assemble notice: Installing the 90 SATA HDD CABLE to the connector of the HDD, follow the picture as shown Installing the HDD PW CABLE to the connector of the HDD, follow the picture as shown. 2 - 37...
  • Page 38 Disassembly Procedure 2 - 38...
  • Page 39 Disassembly Procedure HDD ODD cable assemble notice Parts ⚫ SATA3 HDD 1TB 7200RPM 3.5'*1 ⚫ HDD HOUSING ⚫ DVD S-MULTI DL 8X/6X/8X6X/5X *1 ⚫ D641SC HDD PW CABLE ⚫ Total screw *3 Back 2 - 39...
  • Page 40 POWER SWITCH BOARD & SMART BOARD The illustrations below show how to remove the SW BOARD board and SMART BOARD from the Device 1. Remove 2 srews SW board,disconnect the SW cable . 8+/-10% kgfcm For D700SA For D700SC SCREW #6-32 L6*H2.3 2 - 40...
  • Page 41 Disassembly Procedure POWER SWITCH BOARD SW CABLE assemble notice 2. Remove 1 screw on the FIO SHIELD 2 - 41...
  • Page 42 Disassembly Procedure 3. Remove 4 srewss on the SMART BOARD and disconnect the W.H 1*5P cable . Notice: Please add CRD MYLAR * 3 when you assemble the Card Reader Board. 2 - 42...
  • Page 43 Disassembly Procedure If there is not Smart Card Reader, please use screw*4 to lock the CRDUMMY BRACKET and paste the SSD PAD to assemble the SSD. SCREW M3*4L (W) W-NI / 5.5 kg f-cm+/-10% If there is Smart Card Reader,the SSD PAD should be pasted well. 2 - 43...
  • Page 44 Disassembly Procedure SMART BOARD assemble notice 2 - 44...
  • Page 45 Disassembly Procedure Smart BD Cable assemble notice Cables arrange notice!!! 2 - 45...
  • Page 46 Disassembly Procedure Back Parts ⚫ POWER SWITCH BD.*1 ⚫ SW cable *1 SMART BOARD ⚫ FIO SHIELD*1 ⚫ ⚫ W.H 1*5P cable*1 ⚫ Total screw *6 CPU COOLER & CPU The illustrations below show how to remove the CPU from the Device. 1.
  • Page 47 Disassembly Procedure 2. Rotate the 4 snaps in the direction of the arrow and lift them vertically. the fixed foot out of the slot 3. Pull and take off the thermal. 2 - 47...
  • Page 48 Disassembly Procedure 4.Pull out the CPU pole and Lift the other end of the CPU bar about 100 and take CPU away. Lift the other end of the CPU bar about 100 and take CPU away. ‘ Notice: Please clean remaining CPU and CPU Fan before paste GA500 Grease CPU installation notice 2 - 48...
  • Page 49 Disassembly Procedure the location of Cooler assembly as below: Parts CPU COOLER*1 ⚫ ⚫ CPU CM8070104290715 999TJA//I5-10400 2.9G/12M 6C G1 SRH3C*1 2 - 49...
  • Page 50 Disassembly Procedure MIAN BOARD The illustrations below show how to remove the MB from the Device Remove 9 screws from MB. For D700SC SCREW M3*4L (W) W-NI 5.5 kgf-cm+/-10% For D700SA 2 - 50...
  • Page 51 Disassembly Procedure For D700SA Assemble notice: a. Install the M/B into Chassis in accordance with graphic presentation.Can't shave and can't leak to injure M/B and I/O shell fragment b.Locking 4 screws in diagonal sequence (from 1 to 4) then use screws to secure the MB in clockwise from outside to inside way(refer the below MB ).
  • Page 52 Disassembly Procedure c. After installing M/B to chassis make sure that all of the port of M/B have already faced outwards. 2 - 52...
  • Page 53 Disassembly Procedure Mainboard Assembly Notice: Please follow below information to assemble the RAM. 2 - 53...
  • Page 54 Disassembly Procedure The EMI Foil should be pasted well when you assemble the Mainboard. Front I/O 13PF0230L02011 USB AL FOIL Rear I/O 13PF0250L06011 AUDIO AL FOIL Please well arrange the cable when you assemble the mainboard. Parts ⚫ Total screw *9 D700 MAIN BD.
  • Page 55: Speaker Module

    Disassembly Procedure Speaker Module (Optional By SKU) The illustrations below show how to remove the Speaker Module. Disconnect the Speaker Cable, Remove 6 screws and take out the speaker module. 6#-32 L6 8+/-10% kgf-cm M2*3 2 kgf-cm+/-10% 2 - 55...
  • Page 56 Disassembly Procedure Parts: ⚫ Total screw * 4 ⚫ Speaker Module *1 ⚫ (Actual part name depends on different SKU.) 2 - 56...

This manual is also suitable for:

D700sD700sa

Table of Contents