Atari VIDEO COMPUTER SYSTEM CX2600 Owner's Manual page 3

INSTALL SWITCH BOX
Your TYfGame Switch Bex attaches easily to your TV's VHP an¬
tenna screws. Find the picture that looks the moat like the back of
your TV set and follow those instructions. A flat screwdriver is
required.
If your TV has four screws only:
A. Disconnect the twin- lead wire
horn your TV and attach It to the
"Antenna" screw terminals
on tne TWGamo Switch Sox.
B. Connect tne twin-lead wire from
the TV/Game Switch Box to the
VHF antenna terminals on
your TV set.
In each of these iwo cases, you may need to buy an "Im¬
parlance matching transformer" {also called a "be fun coir').
The Iranslormer is necessary only if you do KQT have a llal
twin lead antenna wire. It Is available at a nominal cost from
your local TV and hi fi stores.
If your TV has a "U" shaped
slider or a slide switch:
A Move the "U" shaped
slider lo make connection
between the two screws.
OR
Push the slide switch to
the side marked ' 300 ohm"
or "300 11°.